/* Part of SWI-Prolog Author: Jan van der Steen, Matt Lilley and Jan Wielemaker, E-mail: J.Wielemaker@vu.nl WWW: http://www.swi-prolog.org Copyright (c) 2004-2020, SWI-Prolog Foundation VU University Amsterdam CWI, Amsterdam All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ :- module(ssl, [ certificate_field/2, % +Certificate, ?Field load_certificate/2, % +Stream, -Certificate load_private_key/3, % +Stream, +Password, -Key load_public_key/2, % +Stream, -Key load_crl/2, % +Stream, -Crl write_certificate/3, % +Stream, -X509, +Options system_root_certificates/1, % -List cert_accept_any/5, % +SSL, +ProblemCertificate, % +AllCertificates, +FirstCertificate, % +Error same_certificate/2, % +CertificateA, +CertificateB ssl_context/3, % +Role, -Config, :Options ssl_add_certificate_key/4, % +Config, +Cert, +Key, -Config ssl_set_options/3, % +Config0, -Config, +Options ssl_property/2, % +Config, ?Property ssl_negotiate/5, % +Config, +PlainRead, +PlainWrite, % -SSLRead, -SSLWrite ssl_peer_certificate/2, % +Stream, -Certificate ssl_peer_certificate_chain/2, % +Stream, -Certificates ssl_session/2, % +Stream, -Session ssl_secure_ciphers/1, % -Ciphers, verify_certificate/3, % +X509, +AuxiliaryCertificates, +TrustedCertificates verify_certificate_issuer/2, % +Certificate, +IssuerCertificate ssl_upgrade_legacy_options/2 % +OptionsIn, -OptionsOut ]). :- autoload(library(option),[select_option/4,select_option/3]). :- use_module(library(settings),[setting/4,setting/2]). :- use_module(library(crypto), []). % force initialization of libcrypto :- use_foreign_library(foreign(ssl4pl)). :- meta_predicate ssl_context(+, -, :), ssl_set_options(+, -, :). :- predicate_options(ssl_context/3, 3, [ host(atom), port(integer), cacerts(list), certificate_file(atom), key_file(atom), certificate_key_pairs(any), password(any), cipher_list(any), ecdh_curve(any), pem_password_hook(callable), cacert_file(any), crl(any), require_crl(boolean), cert_verify_hook(callable), peer_cert(boolean), close_parent(boolean), close_notify(boolean), sni_hook(callable), alpn_protocols(any), alpn_protocol_hook(callable) ]). /** Secure Socket Layer (SSL) library An SSL server and client can be built with the (abstracted) predicate calls from the table below. The `tcp_` predicates are provided by library(socket). The predicate ssl_context/3 defines properties of the SSL connection, while ssl_negotiate/5 establishes the SSL connection based on the wire streams created by the TCP predicates and the context. | *The SSL Server* | *The SSL Client* | | ssl_context/3 | ssl_context/3 | | tcp_socket/1 | | | tcp_accept/3 | tcp_connect/3 | | tcp_open_socket/3 | stream_pair/3 | | ssl_negotiate/5 | ssl_negotiate/5 | The library is abstracted to communication over streams, and is not reliant on those streams being directly attached to sockets. The `tcp_` calls here are simply the most common way to use the library. Other two-way communication channels such as (named), pipes can just as easily be used. @see library(socket), library(http/http_open), library(crypto) */ :- setting(secure_ciphers, atom, 'EECDH+AESGCM:EDH+AESGCM:EECDH+AES256:EDH+AES256:EECDH+CHACHA20:EDH+CHACHA20', "Default set of ciphers considered secure"). %! ssl_context(+Role, -SSL, :Options) is det. % % Create an SSL context. The context defines several properties % of the SSL connection such as involved keys, preferred % encryption, and passwords. After establishing a context, an SSL % connection can be negotiated using ssl_negotiate/5, turning two % arbitrary plain Prolog streams into encrypted streams. This % predicate processes the options below. % % * host(+HostName) % For the client, the host to which it connects. This option % _should_ be specified when Role is `client`. Otherwise, % certificate verification may fail when negotiating a % secure connection. % * certificate_file(+FileName) % Specify where the certificate file can be found. This can be the % same as the key_file(+FileName) option. A server _must_ have at % least one certificate before clients can connect. A client % _must_ have a certificate only if the server demands the client % to identify itself with a client certificate using the % peer_cert(true) option. If a certificate is provided, it is % necessary to also provide a matching _private key_ via the % key_file/1 option. To configure multiple certificates, use the % option certificate_key_pairs/1 instead. Alternatively, use % ssl_add_certificate_key/4 to add certificates and keys to an % existing context. % * key_file(+FileName) % Specify where the private key that matches the certificate can % be found. If the key is encrypted with a password, this must % be supplied using the password(+Text) or % =|pem_password_hook(:Goal)|= option. % * certificate_key_pairs(+Pairs) % Alternative method for specifying certificates and keys. The % argument is a list of _pairs_ of the form Certificate-Key, % where each component is a string or an atom that holds, % respectively, the PEM-encoded certificate and key. To each % certificate, further certificates of the chain can be % appended. Multiple types of certificates can be present at % the same time to enable different ciphers. Using multiple % certificate types with completely independent certificate % chains requires OpenSSL 1.0.2 or greater. % * password(+Text) % Specify the password the private key is protected with (if % any). If you do not want to store the password you can also % specify an application defined handler to return the password % (see next option). Text is either an atom or string. Using % a string is preferred as strings are volatile and local % resources. % * pem_password_hook(:Goal) % In case a password is required to access the private key the % supplied predicate will be called to fetch it. The hook is % called as call(Goal, +SSL, -Password) and typically unifies % `Password` with a _string_ containing the password. % * require_crl(+Boolean) % If true (default is false), then all certificates will be % considered invalid unless they can be verified as not being % revoked. You can do this explicity by passing a list of CRL % filenames via the crl/1 option, or by doing it yourself in % the cert_verify_hook. If you specify require_crl(true) and % provide neither of these options, verification will necessarily % fail % * crl(+ListOfFileNames) % Provide a list of filenames of PEM-encoded CRLs that will be % given to the context to attempt to establish that a chain of % certificates is not revoked. You must also set require_crl(true) % if you want CRLs to actually be checked by OpenSSL. % * cacert_file(+FileName) % Deprecated. Use cacerts/1 instead. % Specify a file containing certificate keys of _trusted_ % certificates. The peer is trusted if its certificate is % signed (ultimately) by one of the provided certificates. Using % the FileName `system(root_certificates)` uses a list of % trusted root certificates as provided by the OS. See % system_root_certificates/1 for details. % * cacerts(+ListOfCATerms) % Specify a list of sources of _trusted_ certificates. % Each element in the list should be one of the following: % * file(Filename): A file containing one or more PEM-encoded % certificates % * certificate(Blob): A certificate blob % * system(root_certificates): A special term which refers to % the certificates trusted by the host OS. % % Additional verification of the peer certificate as well as % accepting certificates that are not trusted by the given set % can be realised using the hook % cert_verify_hook(:Goal). % * cert_verify_hook(:Goal) % The predicate ssl_negotiate/5 calls Goal as follows: % % == % call(Goal, +SSL, % +ProblemCertificate, +AllCertificates, +FirstCertificate, % +Error) % == % % In case the certificate was verified by one of the provided % certifications from the `cacert_file` option, Error is unified % with the atom `verified`. Otherwise it contains the error % string passed from OpenSSL. Access will be granted iff the % predicate succeeds. See load_certificate/2 for a description % of the certificate terms. See cert_accept_any/5 for a dummy % implementation that accepts any certificate. % * cipher_list(+Atom) % Specify a cipher preference list (one or more cipher strings % separated by colons, commas or spaces). See ssl_secure_ciphers/1. % * ecdh_curve(+Atom) % Specify a curve for ECDHE ciphers. If this option is not % specified, the OpenSSL default parameters are used. With % OpenSSL prior to 1.1.0, `prime256v1` is used by default. % * peer_cert(+Boolean) % Trigger the request of our peer's certificate while % establishing the SSL layer. This option is automatically % turned on in a client SSL socket. It can be used in a server % to ask the client to identify itself using an SSL certificate. % * close_parent(+Boolean) % If `true`, close the raw streams if the SSL streams are closed. % Default is `false`. % * close_notify(+Boolean) % If `true` (default is `false`), the server sends TLS % `close_notify` when closing the connection. In addition, % this mitigates _truncation attacks_ for both client and % server role: If EOF is encountered without having received a % TLS shutdown, an exception is raised. Well-designed % protocols are self-terminating, and this attack is therefore % very rarely a concern. % * min_protocol_version(+Atom) % Set the _minimum_ protocol version that can be negotiated. % Atom is one of `sslv3`, `tlsv1`, `tlsv1_1`, `tlsv1_2` and % `tlsv1_3`. This option is available with OpenSSL 1.1.0 and % later, and should be used instead of `disable_ssl_methods/1`. % * max_protocol_version(+Atom) % Set the _maximum_ protocol version that can be negotiated. % Atom is one of `sslv3`, `tlsv1`, `tlsv1_1`, `tlsv1_2` and % `tlsv1_3`. This option is available with OpenSSL 1.1.0 and % later, and should be used instead of `disable_ssl_methods/1`. % * disable_ssl_methods(+List) % A list of methods to disable. Unsupported methods will be % ignored. Methods include `sslv2`, `sslv3`, `sslv23`, % `tlsv1`, `tlsv1_1` and `tlsv1_2`. This option is deprecated % starting with OpenSSL 1.1.0. Use min_protocol_version/1 and % max_protocol_version/1 instead. % * ssl_method(+Method) % Specify the explicit Method to use when negotiating. For % allowed values, see the list for `disable_ssl_methods` above. % Using this option is discouraged. When using OpenSSL 1.1.0 % or later, this option is ignored, and a version-flexible method % is used to negotiate the connection. Using version-specific % methods is deprecated in recent OpenSSL versions, and this % option will become obsolete and ignored in the future. % * sni_hook(:Goal) % This option provides Server Name Indication (SNI) for SSL % servers. This means that depending on the host to which a % client connects, different options (certificates etc.) can % be used for the server. This TLS extension allows you to host % different domains using the same IP address and physical % machine. When a TLS connection is negotiated with a client % that has provided a host name via SNI, the hook is called as % follows: % % == % call(Goal, +SSL0, +HostName, -SSL) % == % % Given the current context SSL0, and the host name of the % client request, the predicate computes SSL which is used as % the context for negotiating the connection. The first solution % is used. If the predicate fails, the default options are % used, which are those of the encompassing ssl_context/3 % call. In that case, if no default certificate and key are % specified, the client connection is rejected. % * alpn_protocols(+ListOfProtoIdentifiers) % Provide a list of acceptable ALPN protocol identifiers as atoms. % ALPN support requires OpenSSL 1.0.2 or greater. % * alpn_protocol_hook(:Goal) % This options provides a callback for a server context to use to % select an ALPN protocol. It will be called as follows: % % === % call(Goal, +SSLCtx0, +ListOfClientProtocols, -SSLCtx1, -SelectedProtocol) % === % % If this option is unset and the `alpn_protocols/1` option is % set, then the first common protocol between client & server will % be selected. % % @arg Role is one of `server` or `client` and denotes whether the % SSL instance will have a server or client role in the % established connection. % @arg SSL is a SWI-Prolog _blob_ of type `ssl_context`, i.e., the % type-test for an SSL context is `blob(SSL, ssl_context)`. ssl_context(Role, SSL, Module:Options) :- select_option(ssl_method(Method), Options, O1, sslv23), ssl_upgrade_legacy_options(O1, O2), ( select_option(cacerts(_), O2, _) -> O3 = O2 ; O3 = [cacerts([system(root_certificates)])|O2] ), '_ssl_context'(Role, SSL, Module:O3, Method). %! ssl_upgrade_legacy_options(+OptionsIn, -Options) is det. % % Handle deprecated cacert_file(Spec) option and map it to the new % cacerts(+List) option. ssl_upgrade_legacy_options(O1, O4) :- select_option(cacert_file(CACertFile), O1, O2), !, print_message(warning, deprecated(ssl_option(cacert_file(CACertFile)))), ( atom(CACertFile) -> Term = file(CACertFile) ; Term = CACertFile % e.g., system(root_certificates) ), select_option(cacerts(CACerts), O2, O3, []), ssl_upgrade_legacy_options([cacerts([Term|CACerts])|O3], O4). % DMILES ssl_upgrade_legacy_options(A,A):- \+ current_prolog_flag(logicmoo_ssl, legacy), !. ssl_upgrade_legacy_options([Skip|Options], SSLOptions):- nonvar(Skip), ssl_skip(Skip),!, ssl_upgrade_legacy_options(Options, SSLOptions). ssl_upgrade_legacy_options([O1|Options], [O2|SSLOptions]):- ssl_option_upgrade(O1,O2), ssl_upgrade_legacy_options(Options, SSLOptions). ssl_upgrade_legacy_options([],[]). ssl_skip(header(content_type,_)). ssl_skip(header(expires,_)). ssl_option_upgrade(O1,O1):-!. %! ssl_add_certificate_key(+SSL0, +Certificate, +Key, -SSL) % % Add an additional certificate/key pair to SSL0, yielding SSL. % Certificate and Key are either strings or atoms that hold the % PEM-encoded certificate plus certificate chain and private key, % respectively. Using strings is preferred for security reasons. % % This predicate allows dual-stack RSA and ECDSA servers (for % example), and is an alternative for using the % `certificate_key_pairs/1` option. As of OpenSSL 1.0.2, multiple % certificate types with completely independent certificate chains % are supported. If a certificate of the same type is added % repeatedly to a context, the result is undefined. Currently, up to % 12 additional certificates of different types are admissible. ssl_add_certificate_key(SSL0, Cert, Key, SSL) :- ssl_copy_context(SSL0, SSL), '_ssl_add_certificate_key'(SSL, Cert, Key). %! ssl_set_options(+SSL0, -SSL, +Options) % % SSL is the same as SSL0, except for the options specified in % Options. The following options are supported: close_notify/1, % close_parent/1, host/1, peer_cert/1, ecdh_curve/1, % min_protocol_version/1, max_protocol_version/1, % disable_ssl_methods/1, sni_hook/1, cert_verify_hook/1, % alpn_protocols/1, and alpn_protocol_hook/1. See ssl_context/3 for % more information about these options. This predicate allows you to % tweak existing SSL contexts, which can be useful in hooks when % creating servers with the HTTP infrastructure. ssl_set_options(SSL0, SSL, Options) :- ssl_copy_context(SSL0, SSL), '_ssl_set_options'(SSL, Options). %! ssl_property(+SSL, ?Property) is semidet. % % True when Property is a property of SSL. Defined properties are: % % - close_parent(?Bool) % % @tbd This version is a very minimal implementation of the generic % property interface. Future versions will add more properties and % non-determinism. %! ssl_negotiate(+SSL, %! +PlainRead, +PlainWrite, %! -SSLRead, -SSLWrite) is det. % % Once a connection is established and a read/write stream pair is % available, (PlainRead and PlainWrite), this predicate can be % called to negotiate an SSL session over the streams. If the % negotiation is successful, SSLRead and SSLWrite are returned. % % After a successful handshake and finishing the communication the % user must close SSLRead and SSLWrite, for example using % call_cleanup(close(SSLWrite), close(SSLRead)). If the SSL % _context_ (created with ssl_context/3 has the option % close_parent(true) (default `false`), closing SSLRead and % SSLWrite also closes the original PlainRead and PlainWrite % streams. Otherwise these must be closed explicitly by the user. % % @error ssl_error(Code, LibName, FuncName, Reason) is raised % if the negotiation fails. The streams PlainRead and PlainWrite % are *not* closed, but an unknown amount of data may have been % read and written. %! ssl_peer_certificate(+Stream, -Certificate) is semidet. % % True if the peer certificate is provided (this is always the % case for a client connection) and Certificate unifies with the % peer certificate. The example below uses this to obtain the % _Common Name_ of the peer after establishing an https client % connection: % % == % http_open(HTTPS_url, In, []), % ssl_peer_certificate(In, Cert), % memberchk(subject(Subject), Cert), % memberchk('CN' = CommonName), Subject) % == %! ssl_peer_certificate_chain(+Stream, -Certificates) is det. % % Certificates is the certificate chain provided by the peer, % represented as a list of certificates. %! ssl_session(+Stream, -Session) is det. % % Retrieves (debugging) properties from the SSL context associated % with Stream. If Stream is not an SSL stream, the predicate % raises a domain error. Session is a list of properties, % containing the members described below. Except for `Version`, % all information are byte arrays that are represented as Prolog % strings holding characters in the range 0..255. % % * ssl_version(Version) % The negotiated version of the session as an integer. % * cipher(Cipher) % The negotiated cipher for this connection. % * session_key(Key) % The key material used in SSLv2 connections (if present). % * master_key(Key) % The key material comprising the master secret. This is % generated from the server_random, client_random and pre-master % key. % * client_random(Random) % The random data selected by the client during handshaking. % * server_random(Random) % The random data selected by the server during handshaking. % * session_id(SessionId) % The SSLv3 session ID. Note that if ECDHE is being used (which % is the default for newer versions of OpenSSL), this data will % not actually be sent to the server. % * alpn_protocol(Protocol) % The negotiated ALPN protocol, if supported. If no protocol was % negotiated, this will be an empty string. %! load_certificate(+Stream, -Certificate) is det. % % Loads a certificate from a PEM- or DER-encoded stream, returning % a certificate. The fields of the certificate can be inspected % using certificate_field(+Certificate, ?Field). % % Note that the OpenSSL `CA.pl` utility creates certificates that % have a human readable textual representation in front of the PEM % representation. You can use the following to skip to the % certificate if you know it is a PEM certificate: % % == % skip_to_pem_cert(In) :- % repeat, % ( peek_char(In, '-') % -> ! % ; skip(In, 0'\n), % at_end_of_stream(In), ! % ). % == %! write_certificate(+Stream, +Certificate, +Options) is det. % % Writes a certificate to the stream Stream. Options is reserved % for future use. %! load_crl(+Stream, -CRL) is det. % % Loads a CRL from a PEM- or DER-encoded stream, returning a term % containing terms hash/1, signature/1, issuer_name/1 and % revocations/1, which is a list of revoked/2 terms. Each % revoked/2 term is of the form revoked(+Serial, DateOfRevocation) %! system_root_certificates(-List) is det. % % List is a list of trusted root certificates as provided by the % OS. This is the list used by ssl_context/3 when using the option % `system(root_certificates)`. The list is obtained using an OS % specific process. The current implementation is as follows: % % - On Windows, CertOpenSystemStore() is used to import % the `"ROOT"` certificates from the OS. % - On MacOSX, the trusted keys are loaded from the % _SystemRootCertificates_ key chain. The Apple API % for this requires the SSL interface to be compiled % with an XCode compiler, i.e., *not* with native gcc. % - Otherwise, certificates are loaded from a file defined % by the Prolog flag `system_cacert_filename`. The initial % value of this flag is operating system dependent. For % security reasons, the flag can only be set prior to using % the SSL library. For example: % % == % :- use_module(library(ssl)). % :- set_prolog_flag(system_cacert_filename, % '/home/jan/ssl/ca-bundle.crt'). % == %! load_private_key(+Stream, +Password, -PrivateKey) is det. % % Load a private key PrivateKey from the given stream Stream, % using Password to decrypt the key if it is encrypted. Note that % the password is currently only supported for PEM files. % DER-encoded keys which are password protected will not load. The % key must be an RSA or EC key. DH and DSA keys are not supported, % and PrivateKey will be bound to an atom (dh_key or dsa_key) if % you try and load such a key. Otherwise PrivateKey will be % unified with private_key(KeyTerm) where KeyTerm is an rsa/8 term % representing an RSA key, or ec/3 for EC keys. %! load_public_key(+Stream, -PublicKey) is det. % % Load a public key PublicKey from the given stream Stream. % Supports loading both DER- and PEM-encoded keys. The key must be % an RSA or EC key. DH and DSA keys are not supported, and % PublicKey will be bound to an atom (dh_key or dsa_key) if you % try and load such a key. Otherwise PublicKey will be unified % with public_key(KeyTerm) where KeyTerm is an rsa/8 term % representing an RSA key, or ec/3 for EC keys. %! cert_accept_any(+SSL, %! +ProblemCertificate, +AllCertificates, +FirstCertificate, %! +Error) is det. % % Implementation for the hook `cert_verify_hook(:Hook)` that % accepts _any_ certificate. This is intended for http_open/3 if % no certificate verification is desired as illustrated below. % % == % http_open('https:/...', In, % [ cert_verify_hook(cert_accept_any) % ]) % == %! same_certificate(+CertificateA, %! +CertificateB). % % True if CertificateA is logically the same as CertificateB, even if % they are stored in different blobs %! verify_certificate_issuer(+Certificate, %! +Issuer). % % True if Certificate is a certificate which was issued by the % certificate Issuer. %! verify_certificate(+Certificate, %! +AuxiliaryCertificates, %! +TrustedCertificates). % % True if it is possible to build a chain of trust from Certificate to % one of the certificates in TrustedCertificates, optionally using the % (untrusted) certificates in AuxiliaryCertificates to complete the % chain. % To use the system built-in trust store, specify the special term % system(root_certificates) for TrustedCertificates. %! certificate_field(+Certificate, %! ?Field) is nondet. % % Retrieve the field matching Field from Certificate. May be % one of the following: % * subject/1 to retrieve the subject % * issuer/1 to retrieve the issuer's subject % * version/1 to retrieve the version % * serial/1 to retrieve the serial number % * not_before/1 to retrieve the start date % * not_after/1 to retrieve the expiry date % * public_key/1 to retrieve the public key % * crls/1 to retrieve a list of the CRLs % * sans/1 to retrieve a list of the Subject Alternative Names % * signature/1 to retrieve the certificate signature % * signature_algorithm/1 to retrieve the signing algorithm % * hash/1 to retrieve the certificate hash % * to_be_signed/1 to retrieve the data on the certificate which % must be signed cert_accept_any(_SSL, _ProblemCertificate, _AllCertificates, _FirstCertificate, _Error). %! ssl_secure_ciphers(-Ciphers:atom) is det. % % Ciphers is a secure cipher preference list that can be used in the % cipher_list/1 option of ssl_context/3. % % Secure ciphers must guarantee forward secrecy, and must mitigate all % known critical attacks. As of 2018, using these ciphers allows you % to obtain grade A on https://www.ssllabs.com. For A+, you must also % enable HTTP Strict Transport Security (HSTS) by sending a suitable % header field in replies. % % Note that obsolete ciphers *must* be disabled to reliably prevent % protocol downgrade attacks. % % The Ciphers list is read from the setting `ssl:secure_ciphers` and % can be controlled using set_setting/2 and other predicates from % library(settings). % % *BEWARE*: This list must be changed when attacks on these ciphers % become known! Keep an eye on this setting and adapt it % as necessary in the future. ssl_secure_ciphers(Cs) :- setting(secure_ciphers, Cs). /******************************* * MESSAGES * *******************************/ :- multifile prolog:error_message//1, prolog:deprecated//1. prolog:error_message(ssl_error(ID, _Library, Function, Reason)) --> [ 'SSL(~w) ~w: ~w'-[ID, Function, Reason] ]. prolog:deprecated(ssl_option(cacert_file(CACertFile))) --> [ 'SSL: cacert_file(~q) has need deprecated.'-[CACertFile], 'Please use the option cacerts(List) instead' ].