;;; matlab-shell.el --- Run MATLAB in an inferior process ;; ;; Copyright (C) 2019 Eric Ludlam ;; ;; Author: Eric Ludlam ;; ;; This program is free software; you can redistribute it and/or ;; modify it under the terms of the GNU General Public License as ;; published by the Free Software Foundation, either version 3 of the ;; License, or (at your option) any later version. ;; This program is distributed in the hope that it will be useful, but ;; WITHOUT ANY WARRANTY; without even the implied warranty of ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ;; General Public License for more details. ;; You should have received a copy of the GNU General Public License ;; along with this program. If not, see https://www.gnu.org/licenses/. ;;; Commentary: ;; ;; This library supports a MATLAB shell buffer, which runs MATLAB in ;; an inferior shell. Supports working with the MATLAB command line, ;; and the MATLAB debugger. ;; ;;; Code: (require 'matlab) (require 'matlab-compat) (require 'comint) (require 'server) (eval-and-compile (require 'gud) (require 'shell) ) ;; Slience warnings from company.el (declare-function company-mode "company") (defvar company-idle-delay) (defvar company-mode) ;; Key entry points for matlab-shell-gud (declare-function matlab-shell-mode-gud-enable-bindings "matlab-shell-gud") (declare-function matlab-shell-gud-startup "matlab-shell-gud") ;;; Customizations ;; ;; Options to configure using matlab-shell (defgroup matlab-shell nil "MATLAB shell mode." :prefix "matlab-shell-" :group 'matlab) ;; ;; Shell Startup (defcustom matlab-shell-mode-hook nil "*List of functions to call on entry to MATLAB shell mode." :group 'matlab-shell :type 'hook) (defcustom matlab-shell-command "matlab" "*The name of the command to be run which will start the MATLAB process." :group 'matlab-shell :type 'string) (defcustom matlab-shell-command-switches '("-nodesktop") "*Command line parameters run with `matlab-shell-command'. Command switches are a list of strings. Each entry is one switch." :group 'matlab-shell :type '(list :tag "Switch: ")) (defface matlab-shell-error-face (list (list t (list :background nil :foreground "red1" :bold t))) "*Face to use when errors occur in MATLAB shell." :group 'matlab-shell) (defcustom matlab-custom-startup-command nil "Custom MATLAB command to be run at startup." :group 'matlab-shell :type 'string) (defcustom matlab-shell-echoes t "*If `matlab-shell-command' echoes input." :group 'matlab-shell :type 'boolean) (defcustom matlab-shell-history-file "~/.matlab/%s/history.m" "*Location of the history file. A %s is replaced with the MATLAB version release number, such as R12. This file is read to initialize the comint input ring." :group 'matlab-shell :type 'filename) (defcustom matlab-shell-history-ignore "^%\\|%%$\\|emacs.set" "Regular expression matching items from history to ignore. This expression should ignore comments (between sessions) and any command that ends in 2 or more %%, added to automatic commands." :group 'matlab-shell :type 'filename) (defcustom matlab-shell-autostart-netshell nil "Use the netshell side-channel for communicating with MATLAB." :group 'matlab-shell :type 'boolean) ;; ;; Edit from MATLAB (defcustom matlab-shell-emacsclient-command (matlab-find-emacsclient) "*The command to use as an external editor for MATLAB. Using emacsclient allows the currently running Emacs to also be the external editor for MATLAB. Setting this to the empty string will disable use emacsclient as the external editor." :group 'matlab-shell :type 'integer) ;; ;; Run from Emacs (defcustom matlab-shell-run-region-function 'auto "Technique to use for running a line, region, or cell. There are different benefits to different kinds of commands. Use 'auto to guess which to use by looking at the environment. auto - guess which to use matlab-shell-region->commandline - Extract region, and generate 1 line of ML code. matlab-shell-region->script - Extract region and any local fcns, and write to tmp script. Call that from MATLAB. matlab-shell-region->internal - Send region location to MATLAB, and have ML extract and run that region. Customize `matlab-shell-emacsrunregion' to specify what ML function to use for this." :group 'matlab-shell :type '(choice (const :tag "Auto" auto) (const :tag "Extract Line" matlab-shell-region->commandline) (const :tag "Extract Script" matlab-shell-region->script) (const :tag "Matlab Extract" matlab-shell-region->internal))) (defcustom matlab-shell-internal-emacsrunregion "emacsrunregion" "The MATLAB command to use for running a region. This command is used when `matlab-shell-run-region-function' is set to auto, or `matlab-shell-region->internal'" :group 'matlab-shell :type 'string) ;; ;; Features in an active shell (defcustom matlab-shell-input-ring-size 32 "*Number of history elements to keep." :group 'matlab-shell :type 'integer) ;; ;; Completion handling (defcustom matlab-shell-ask-MATLAB-for-completions t "When Non-nil, ask MATLAB for a completion list. When nil, complete against file names." :group 'matlab-shell :type 'boolean) (defcustom matlab-shell-tab-use-company t "*Use `company' (complete anything) for TAB completions in `matlab-shell'. Only effective when when `company' is installed. Note, when you type to narrow completions, you may find the responses slow and if so, you can try turning this off." :group 'matlab-shell :type 'boolean) (defvar matlab-shell-tab-company-available (if (locate-library "company") t nil) "Non-nil if we have `company' installed. Use this to override initial check.") (defvar matlab-shell-errorscanning-syntax-table (let ((st (copy-syntax-table matlab-mode-syntax-table))) ;; Make \n be whitespace when scanning output. (modify-syntax-entry ?\n " " st) st) "Syntax table used when scanning MATLAB output. In this case, comment and \n are not special, as word wrap can get in the way.") (defvar matlab-shell-prompt-appears-hook nil "Hooks run each time a prompt is seen and sent to display. If multiple prompts are seen together, only call this once.") (defvar matlab-shell-prompt-hook-cookie nil "Cookie used to transfer info about detected prompts from inner filter to outer.") (make-variable-buffer-local 'matlab-shell-prompt-hook-cookie) (defvar matlab-shell-suppress-prompt-hooks nil "Non-nil to suppress running prompt hooks.") (defvar matlab-shell-cco-testing nil "Non nil when testing `matlab-shell'.") (defvar matlab-shell-io-testing nil "Non-nil to display process output and input log.") ;;; Font Lock ;; ;; Extra font lock keywords for the MATLAB shell. (defconst matlab-shell-font-lock-keywords (list ;; How about Errors? '("^\\(Error in\\|Syntax error in\\)\\s-+==>\\s-+\\(.+\\)$" (1 font-lock-comment-face) (2 font-lock-string-face)) ;; and line numbers '("^\\(\\(On \\)?line [0-9]+\\)" 1 font-lock-comment-face) ;; User beep things '("\\(\\?\\?\\?[^\n]+\\)" 1 font-lock-comment-face) ) "Additional keywords used by MATLAB when reporting errors in interactive\ mode.") (defconst matlab-shell-font-lock-keywords-1 (append matlab-basic-font-lock-keywords matlab-shell-font-lock-keywords) "Keyword symbol used for basic font-lock for MATLAB shell.") (defconst matlab-shell-object-output-font-lock-keywords (list ;; Startup notices '(" M A T L A B " 0 'underline) '("All Rights Reserved" 0 'italic) '("\\(\\(?:(c)\\)?\\s-+Copyright[^\n]+\\)" 1 font-lock-comment-face) '("\\(Version\\)\\s-+\\([^\n]+\\)" (1 font-lock-function-name-face) (2 font-lock-variable-name-face)) '("\\(R[0-9]+[ab]\\(?: Update [0-9]+\\)\\) \\([^\n]+\\)" (1 font-lock-function-name-face) (2 font-lock-variable-name-face)) '("^To get started, type doc.$" 0 font-lock-comment-face prepend) '("For product information, [^\n]+" 0 font-lock-comment-face) ;; Useful user commands, but not useful programming constructs '("\\<\\(demo\\|whatsnew\\|info\\|subscribe\\|help\\|doc\\|lookfor\\|what\ \\|whos?\\|cd\\|clear\\|load\\|save\\|helpdesk\\|helpwin\\)\\>" 1 font-lock-keyword-face) ;; disp of objects usually looks like this: '("^\\s-*\\(\\w+\\) with properties:" (1 font-lock-type-face)) ;; object output - highlight property names after 'with properties:' indicator ;; NOTE: Normally a block like this would require us to use `font-lock-multiline' feature ;; but since this is shell output, and not a thing you edit, we can skip it and rely ;; on matlab-shell dumping the text as a unit. '("^\\s-*\\(\\w+ with properties:\\)\n\\s-*\n" ("^\\s-*\\(\\w+\\):[^\n]+$" ;; match the property before the : ;; Extend search region across lines. (save-excursion (re-search-forward "\n\\s-*\n" nil t) (beginning-of-line) (point)) nil (1 font-lock-variable-name-face))) '("[[{]\\([0-9]+\\(?:x[0-9]+\\)+ \\w+\\)[]}]" (1 font-lock-comment-face)) ) "Highlight various extra outputs that are typical for MATLAB.") (defconst matlab-shell-font-lock-keywords-2 (append matlab-shell-font-lock-keywords-1 matlab-function-font-lock-keywords matlab-shell-object-output-font-lock-keywords) "Keyword symbol used for gaudy font-lock for MATLAB shell.") (defconst matlab-shell-font-lock-keywords-3 (append matlab-shell-font-lock-keywords-2 matlab-really-gaudy-font-lock-keywords) "Keyword symbol used for really gaudy font-lock for MATLAB shell.") ;;; ROOT ;; ;;;###autoload (defun matlab-mode-determine-matlabroot () "Return the MATLABROOT for the 'matlab-shell-command'." (let ((path (file-name-directory matlab-shell-command))) ;; if we don't have a path, find the MATLAB executable on our path. (when (not path) (setq path (matlab-find-executable-directory matlab-shell-command))) (when path ;; When we find the path, we need to massage it to identify where ;; the M files are that we need for our completion lists. (if (string-match "/bin/?$" path) (setq path (substring path 0 (match-beginning 0))))) path)) ;;; Keymaps & Menus ;; (defvar matlab-shell-mode-map (let ((km (make-sparse-keymap 'matlab-shell-mode-map))) ;; Mostly use comint mode's map. (matlab-set-keymap-parent km comint-mode-map) ;; We can jump to errors, so take over this keybinding. (substitute-key-definition 'next-error 'matlab-shell-last-error km global-map) ;; Interrupt (define-key km [(control c) (control c)] 'matlab-shell-interrupt-subjob) ;; Help system (define-key km [(control h) (control m)] matlab-help-map) ;; Completion (define-key km (kbd "TAB") 'matlab-shell-tab) (define-key km "\C-i" 'matlab-shell-tab) (define-key km (kbd "") 'matlab-shell-c-tab) ;; Command history (define-key km [(control up)] 'comint-previous-matching-input-from-input) (define-key km [(control down)] 'comint-next-matching-input-from-input) (define-key km [up] 'matlab-shell-previous-matching-input-from-input) (define-key km [down] 'matlab-shell-next-matching-input-from-input) ;; Editing (define-key km [(control return)] 'comint-kill-input) (define-key km [(backspace)] 'matlab-shell-delete-backwards-no-prompt) ;; Files (define-key km "\C-c." 'matlab-shell-locate-fcn) ;; matlab-shell actions (define-key km "\C-c/" 'matlab-shell-sync-buffer-directory) km) "Keymap used in `matlab-shell-mode'.") (easy-menu-define matlab-shell-menu matlab-shell-mode-map "MATLAB shell menu" '("MATLAB" ["Goto last error" matlab-shell-last-error t] "----" ["Stop On Errors" matlab-shell-dbstop-error t] ["Don't Stop On Errors" matlab-shell-dbclear-error t] "----" ["Locate MATLAB function" matlab-shell-locate-fcn :help "Run 'which FCN' in matlab-shell, then open the file in Emacs"] ["Run Command" matlab-shell-run-command t] ["Describe Variable" matlab-shell-describe-variable t] ["Describe Command" matlab-shell-describe-command t] ["Lookfor Command" matlab-shell-apropos t] "----" ["Complete command" matlab-shell-tab t] "----" ["Demos" matlab-shell-demos t] ["Close Current Figure" matlab-shell-close-current-figure t] ["Close Figures" matlab-shell-close-figures t] "----" ["Sync buffer directory (emacscd)" matlab-shell-sync-buffer-directory :help "Sync the matlab-shell buffer `default-directory' with MATLAB's pwd.\n\ These will differ when MATLAB code changes directory without notifying Emacs."] ["Customize" (customize-group 'matlab-shell) (and (featurep 'custom) (fboundp 'custom-declare-variable)) ] ["Exit" matlab-shell-exit t])) (easy-menu-add matlab-shell-menu matlab-shell-mode-map) ;;; MODE ;; ;; The Emacs major mode for interacting with the matlab shell process. (defvar matlab-shell-last-error-anchor) ;; Quiet compiler warning (defun matlab-shell-mode () "Run MATLAB as a subprocess in an Emacs buffer. This mode will allow standard Emacs shell commands/completion to occur with MATLAB running as an inferior process. Additionally, this shell mode is integrated with `matlab-mode', a major mode for editing M code. > From an M file buffer: \\ \\[matlab-shell-save-and-go] - Save the current M file, and run it in a \ MATLAB shell. > From Shell mode: \\ \\[matlab-shell-last-error] - find location of last MATLAB runtime error \ in the offending M file. > From an M file, or from Shell mode: \\ \\[matlab-shell-run-command] - Run COMMAND and show result in a popup buffer. \\[matlab-shell-describe-variable] - Show variable contents in a popup buffer. \\[matlab-shell-describe-command] - Show online documentation for a command \ in a popup buffer. \\[matlab-shell-apropos] - Show output from LOOKFOR command in a popup buffer. > Keymap: \\{matlab-mode-map}" (setq major-mode 'matlab-shell-mode mode-name "M-Shell" comint-prompt-regexp "^\\(K\\|EDU\\)?>> *" comint-delimiter-argument-list (list [ 59 ]) ; semi colon comint-dynamic-complete-functions '(comint-replace-by-expanded-history) comint-process-echoes matlab-shell-echoes comint-get-old-input #'matlab-comint-get-old-input ) ;; Shell Setup (require 'shell) ;; COMINT History Setup (set (make-local-variable 'comint-input-ring-size) matlab-shell-input-ring-size) (set (make-local-variable 'comint-input-ring-file-name) (format matlab-shell-history-file "R12")) (if (fboundp 'comint-read-input-ring) (comint-read-input-ring t)) ;;; MODE Settings (make-local-variable 'comment-start) (setq comment-start "%") (use-local-map matlab-shell-mode-map) (set-syntax-table matlab-mode-syntax-table) (make-local-variable 'font-lock-defaults) (setq font-lock-defaults '((matlab-shell-font-lock-keywords-1 matlab-shell-font-lock-keywords-2 matlab-shell-font-lock-keywords-3) t nil ((?_ . "w")))) ;; GUD support (matlab-shell-mode-gud-enable-bindings) ;; Company mode can be used to display completions for MATLAB in matlab-shell. ;; This block enables company mode for this shell, and turns off the idle timer ;; so users must press TAB to get the menu. (when (and matlab-shell-tab-use-company matlab-shell-tab-company-available) ;; Only do popup when users presses TAB (set (make-local-variable 'company-idle-delay) nil) (company-mode)) ;; Hooks, etc (run-hooks 'matlab-shell-mode-hook) (matlab-show-version) ) ;;; NETSHELL integration ;; (declare-function matlab-netshell-client "matlab-netshell") (declare-function matlab-netshell-server-start "matlab-netshell") (declare-function matlab-netshell-server-active-p "matlab-netshell") (declare-function matlab-netshell-eval "matlab-netshell") (defun matlab-netshell-active-p () "Return t if the MATLAB netshell is active." (when (featurep 'matlab-netshell) (matlab-netshell-client))) (defun matlab-any-shell-active-p () "Return non-nil of any of the matlab connections are active." (or (matlab-netshell-active-p) (matlab-shell-active-p))) ;;; MATLAB SHELL ;; ;; Core shell state handling & startup function. (defvar matlab-shell-buffer-name "MATLAB" "Name used to create `matlab-shell' mode buffers. This name will have *'s surrounding it.") (defvar matlab-prompt-seen nil "Track visibility of MATLAB prompt in MATLAB Shell.") (defun matlab-shell-active-p () "Return t if the MATLAB shell is active." (let ((msbn (get-buffer (concat "*" matlab-shell-buffer-name "*")))) (if msbn (with-current-buffer msbn (if (comint-check-proc (current-buffer)) (current-buffer)))))) ;;;###autoload (defun matlab-shell () "Create a buffer with MATLAB running as a subprocess. MATLAB shell cannot work on the MS Windows platform because MATLAB is not a console application." (interactive) ;; MATLAB shell does not work by default on the Windows platform. Only ;; permit it's operation when the shell command string is different from ;; the default value. (True when the engine program is running.) (when (and (or (eq window-system 'pc) (eq window-system 'w32)) (string= matlab-shell-command "matlab")) (error "MATLAB cannot be run as a inferior process. \ Try C-h f matlab-shell RET")) (require 'shell) (require 'matlab-shell-gud) ;; Make sure netshell is started if it is wanted. (when (and matlab-shell-autostart-netshell (not (matlab-netshell-server-active-p))) (matlab-netshell-server-start)) ;; Show the shell buffer (switch-to-buffer (concat "*" matlab-shell-buffer-name "*")) ;; If the shell isn't active yet, start it. (when (not (matlab-shell-active-p)) ;; Clean up crufty state (kill-all-local-variables) ;; Thx David Chappaz for reminding me about this patch. (let* ((windowid (frame-parameter (selected-frame) 'outer-window-id)) (newvar (concat "WINDOWID=" windowid)) (process-environment (cons newvar process-environment))) (apply #'make-comint matlab-shell-buffer-name matlab-shell-command nil matlab-shell-command-switches)) ;; Enable GUD (matlab-shell-gud-startup) ;; Init our filter and sentinel (set-process-filter (get-buffer-process (current-buffer)) 'matlab-shell-wrapper-filter) (set-process-sentinel (get-buffer-process (current-buffer)) 'matlab-shell-wrapper-sentinel) ;; XEmacs has problems w/ this variable. Set it here. (set-marker comint-last-output-start (point-max)) (make-local-variable 'matlab-prompt-seen) (setq matlab-prompt-seen nil) ;; FILTERS ;; ;; Add hook for finding the very first prompt - so we know when the buffer is ready to use. (add-hook 'matlab-shell-prompt-appears-hook #'matlab-shell-first-prompt-fcn) ;; Track current directories when user types cd (add-hook 'comint-input-filter-functions 'shell-directory-tracker nil t) ;; patch Eli Merriam ;; Add a version scraping logo identification filter. (add-hook 'comint-output-filter-functions 'matlab-shell-version-scrape nil t) ;; Add pseudo html-renderer (add-hook 'comint-output-filter-functions 'matlab-shell-render-html-anchor nil t) ;; Scroll to bottom after running cell/region (add-hook 'comint-output-filter-functions 'comint-postoutput-scroll-to-bottom nil t) ;; Add error renderer to prompt hook so the prompt is available for resolving names. (make-local-variable 'matlab-shell-last-error-anchor) (setq matlab-shell-last-error-anchor nil) (add-hook 'matlab-shell-prompt-appears-hook 'matlab-shell-render-errors-as-anchor nil t) (add-hook 'matlab-shell-prompt-appears-hook 'matlab-shell-colorize-errors nil t) ;; Comint and GUD both try to set the mode. Now reset it to ;; matlab mode. (matlab-shell-mode)) ) ;;; PROCESS FILTERS & SENTINEL ;; ;; These are wrappers around the GUD filters so we can pre and post process ;; decisions by comint and gud. (defvar matlab-shell-capturetext-start-text "" "Text used as simple signal for text that should be captured.") (defvar matlab-shell-capturetext-end-text "" "Text used as simple signal for text that should be captured.") (defvar matlab-shell-accumulator "" "Accumulate text that is being captured.") (make-variable-buffer-local 'matlab-shell-accumulator) (defvar matlab-shell-flush-accumulation-buffer nil "When non-nil, flush the accumulation buffer.") (defvar matlab-shell-in-process-filter nil "Non-nil when inside `matlab-shell-wrapper-filter'.") (defun matlab-shell-wrapper-filter (proc string) "MATLAB Shell's process filter. This wraps the GUD and COMINT filters. PROC is the process with input to this filter. STRING is the recent output from PROC to be filtered." ;; A few words about process sentinel's in the MATLAB shell buffer: ;; Our filter calls the GUD filter. ;; The GUD filter calls the COMINT filter. ;; The COMINT filter writes output to the buffer and runs filters. ;; We need to run our error anchor commands AFTER all of the above is done, ;; but ONLY when we have an empty prompt and can ask MATLAB more questions. ;; We need this filter to provide a hook on prompt display when everything ;; has been processed. (let ((buff (process-buffer proc)) (captext nil) (matlab-shell-in-process-filter t)) ;; Cleanup garbage before sending it along to the other filters. (let ((garbage (concat "\\(" (regexp-quote "\C-g") "\\|" (regexp-quote "\033[H0") "\\|" (regexp-quote "\033[H\033[2J") "\\|" (regexp-quote "\033H\033[2J") "\\)"))) (while (string-match garbage string) ;;(if (= (aref string (match-beginning 0)) ?\C-g) ;;(beep t)) (setq string (replace-match "" t t string)))) ;; Engage the accumulator (setq matlab-shell-accumulator (concat matlab-shell-accumulator string) string "") ;; STARTCAP - push preceeding text to output. (if (and (not matlab-shell-flush-accumulation-buffer) (string-match (regexp-quote matlab-shell-capturetext-start-text) matlab-shell-accumulator)) (progn (setq string (substring matlab-shell-accumulator 0 (match-beginning 0)) matlab-shell-accumulator (substring matlab-shell-accumulator (match-beginning 0))) ;; START and ENDCAP - save captured text, and push trailing text to output (when (string-match (concat (regexp-quote matlab-shell-capturetext-end-text) "\\(:?\n\\)?") matlab-shell-accumulator) ;; If no end, then send anything before the CAP, and accumulate everything ;; else. (setq string (concat string (substring matlab-shell-accumulator (match-end 0))) captext (substring matlab-shell-accumulator 0 (match-end 0)) matlab-shell-accumulator ""))) ;; No start capture, or an ended capture, everything goes back to String (setq string (concat string matlab-shell-accumulator) matlab-shell-accumulator "" matlab-shell-flush-accumulation-buffer nil)) (with-current-buffer buff (gud-filter proc string)) ;; In case things get switched around on us (with-current-buffer buff (when matlab-shell-prompt-hook-cookie (setq matlab-shell-prompt-hook-cookie nil) (run-hooks 'matlab-shell-prompt-appears-hook)) ) ;; If there was some captext, process it, but only after doing all the other important ;; stuff. (when captext (matlab-shell-process-capture-text captext)) )) (defun matlab-shell-wrapper-sentinel (proc string) "MATLAB Shell's process sentinel. This wraps the GUD and COMINT filters. PROC is the function which experienced a change in state. STRING is a description of what happened." (let ((buff (process-buffer proc))) (with-current-buffer buff (gud-sentinel proc string)))) ;;; COMINT support fcns ;; (defun matlab-comint-get-old-input () "Compute text from the current line to evaluate with MATLAB. This function checks to make sure the line is on a prompt. If not, it returns empty string" (let ((inhibit-field-text-motion t)) (save-excursion (beginning-of-line) (save-match-data (if (looking-at comint-prompt-regexp) ;; We'll send this line. (buffer-substring-no-properties (match-end 0) (point-at-eol)) ;; Otherwise, it's probably junk that is useless. Don't do it. ""))))) ;;; STARTUP / VERSION ;; ;; Handlers for startup output / version scraping ;; ;; TODO - these scraped values aren't used anywhere. Do we care? (defvar matlab-shell-running-matlab-version nil "The version of MATLAB running in the current `matlab-shell' buffer.") (defvar matlab-shell-running-matlab-release nil "The release of MATLAB running in the current `matlab-shell' buffer.") (defun matlab-shell-version-scrape (str) "Scrape the MATLAB Version from the MATLAB startup text. Argument STR is the string to examine for version information." (if (string-match "\\(Version\\)\\s-+\\([.0-9]+\\)\\s-+(\\(R[.0-9]+[ab]?\\))" str) ;; OLDER MATLAB'S (setq matlab-shell-running-matlab-version (match-string 2 str) matlab-shell-running-matlab-release (match-string 3 str)) ;; NEWER MATLAB'S (if (string-match "\\(R[0-9]+[ab]\\)\\s-+\\(?:Update\\s-+[0-9]+\\s-+\\|Prerelease\\s-+\\)?(\\([0-9]+\\.[0-9]+\\)\\." str) (setq matlab-shell-running-matlab-version (match-string 2 str) matlab-shell-running-matlab-release (match-string 1 str)))) ;; Notice that this worked. (when matlab-shell-running-matlab-version ;; Remove the scrape from our list of things to do. We are done getting the version. (remove-hook 'comint-output-filter-functions 'matlab-shell-version-scrape t) (message "Detected MATLAB %s (%s) -- Loading history file" matlab-shell-running-matlab-release matlab-shell-running-matlab-version) ;; Now get our history loaded (setq comint-input-ring-file-name (format matlab-shell-history-file matlab-shell-running-matlab-release) comint-input-history-ignore matlab-shell-history-ignore) (if (fboundp 'comint-read-input-ring) (comint-read-input-ring t)) )) ;;; ANCHORS ;; ;; Scan output for text, and turn into navigable links. (defvar gud-matlab-marker-regexp-prefix "error:\\|opentoline\\|dbhot" "A prefix to scan for to know if output might be scarfed later.") (defvar matlab-shell-html-map (let ((km (make-sparse-keymap))) (if (string-match "XEmacs" emacs-version) (define-key km [button2] 'matlab-shell-html-click) (define-key km [mouse-2] 'matlab-shell-html-click) (define-key km [mouse-1] 'matlab-shell-html-click)) (define-key km [return] 'matlab-shell-html-go) km) "Keymap used on overlays that represent errors.") ;; Anchor expressions. (defvar matlab-anchor-beg "" "Beginning of html anchor.") (defvar matlab-anchor-end "" "End of html anchor.") (defun matlab-shell-render-html-anchor (str) "Render html anchors inserted into the MATLAB shell buffer. Argument STR is the text for the anchor." (when (string-match matlab-anchor-end str) (save-excursion (with-syntax-table matlab-shell-errorscanning-syntax-table (while (re-search-backward matlab-anchor-beg ;; Arbitrary back-buffer. We don't ;; usually get text in such huge chunks (max (point-min) (- (point-max) 8192)) t) (let* ((anchor-beg-start (match-beginning 0)) (anchor-beg-finish (match-end 0)) (anchor-text (match-string 1)) (anchor-end-finish (search-forward matlab-anchor-end)) (anchor-end-start (match-beginning 0)) (o (matlab-make-overlay anchor-beg-finish anchor-end-start))) (matlab-overlay-put o 'mouse-face 'highlight) (matlab-overlay-put o 'face 'underline) (matlab-overlay-put o 'matlab-url anchor-text) (matlab-overlay-put o 'keymap matlab-shell-html-map) (matlab-overlay-put o 'help-echo anchor-text) (delete-region anchor-end-start anchor-end-finish) (delete-region anchor-beg-start anchor-beg-finish) )))))) ;;; ERROR HANDLING ;; ;; The regular expression covers to forms in tests/erroexamples.shell.m ;; (defvar matlab-shell-error-anchor-expression (concat "^\\s-*\\(\\(Error \\(in\\|using\\)\\s-+\\|Syntax error in \\)\\(?:==> \\)?\\|" "In\\s-+\\(?:workspace belonging to\\s-+\\)?\\|Error:\\s-+File:\\s-+\\|Warning:\\s-+[^\n]+\n\\)") "Expressions used to find errors in MATLAB process output. This variable contains the anchor, or starting text before a typical error. See `matlab-shell-error-location-expression' for a list of expressions for identifying where the error is after this anchor.") (defvar matlab-shell-error-location-expression (list ;; Pulled from R2019b "\\(?:^> In\\s-+\\)?\\([-+>@.a-zA-Z_0-9/ \\\\:]+\\)\\s-+(line \\([0-9]+\\))" "\\([-+>@.a-zA-Z_0-9/ \\\\:]+\\)\\s-+Line:\\s-+\\([0-9]+\\)\\s-+Column:\\s-+\\([0-9]+\\)" ;; Oldest I have examples for: (concat "\\([-+>@.a-zA-Z_0-9/ \\\\:]+\\)\\(?:>[^ ]+\\)?.*[\n ]" "\\(?:On\\|at\\)\\(?: line\\)? \\([0-9]+\\) ?") ) "List of Expressions to search for after an error anchor is found. These expressions are listed as matching from newer MATLAB versions to older MATLAB's. Each expression should have the following match strings: 1 - The matlab function 2 - The line number 3 - The column number (if available)") ;; (global-set-key [f7] 'matlab-shell-scan-for-error-test) (defun matlab-shell-scan-for-error-test () "Interactively try out the error scanning feature." (interactive) (let ((ans (matlab-shell-scan-for-error (point-min)))) (when ans (pulse-momentary-highlight-region (car ans) (car (cdr ans)))) (message "Found: %S" ans))) (defun matlab-shell-scan-for-error (limit) "Scan backward for a MATLAB error in the current buffer until LIMIT. Uses `matlab-shell-error-anchor-expression' to find the error. Uses `matlab-shell-error-location-expression' to find where the error is. Returns a list of the form: ( STARTPT ENDPT FILE LINE COLUMN )" (with-syntax-table matlab-shell-errorscanning-syntax-table (let ((ans nil) (beginning nil)) (when (re-search-backward matlab-shell-error-anchor-expression limit t) (save-excursion (setq beginning (save-excursion (goto-char (match-beginning 0)) (back-to-indentation) (point))) (goto-char (match-end 0)) (dolist (EXP matlab-shell-error-location-expression) (when (looking-at EXP) (setq ans (list beginning (match-end 0) (match-string-no-properties 1) (match-string-no-properties 2) (match-string-no-properties 3) ))))) ) ans))) (defvar matlab-shell-last-error-anchor nil "Last point where an error anchor was set.") (defvar matlab-shell-last-anchor-as-frame nil ;; NOTE: this isn't being used yet. "The last error anchor saved, represented as a debugger frame.") (defun matlab-shell-render-errors-as-anchor (&optional str) "Hook function run when process filter sees a prompt. Detect non-url errors, and treat them as if they were url anchors. Input STR is provided by comint but is unused." (save-excursion ;; Move to end to make sure we are scanning the new stuff. (goto-char (point-max)) ;; We have found an error stack to investigate. (let ((first nil) (ans nil) (overlaystack nil) (starting-anchor matlab-shell-last-error-anchor) (newest-anchor matlab-shell-last-error-anchor) ) (while (setq ans (matlab-shell-scan-for-error (or starting-anchor (point-min)))) (let* ((err-start (nth 0 ans)) (err-end (nth 1 ans)) (err-file (matlab-string-trim (nth 2 ans))) (err-line (nth 3 ans)) (err-col (nth 4 ans)) (o (matlab-make-overlay err-start err-end)) (err-mref-deref (matlab-shell-mref-to-filename err-file)) (err-full-file (when err-mref-deref (expand-file-name err-mref-deref))) (url (concat "opentoline('" (or err-full-file err-file) "'," err-line ",0)")) ) ;; Setup the overlay with the URL. (matlab-overlay-put o 'mouse-face 'highlight) (matlab-overlay-put o 'face 'underline) ;; The url will recycle opentoline code. (matlab-overlay-put o 'matlab-url url) (matlab-overlay-put o 'matlab-fullfile err-full-file) (matlab-overlay-put o 'keymap matlab-shell-html-map) (matlab-overlay-put o 'help-echo (concat "Jump to error at " (or err-full-file err-file) ".")) (setq first url) (push o overlaystack) ;; Save as a frame (setq matlab-shell-last-anchor-as-frame (cons err-file err-line)) (setq newest-anchor (max (or newest-anchor (point-min)) err-end)) )) ;; Keep track of the very first error in this error stack. ;; It will represent the "place to go" for "go-to-last-error". (dolist (O overlaystack) (matlab-overlay-put O 'first-in-error-stack first)) ;; Once we've found something, don't scan it again. (when overlaystack (setq matlab-shell-last-error-anchor (save-excursion (goto-char newest-anchor) (point-marker))))))) (defvar matlab-shell-errortext-start-text "\n" "Text used as a signal for errors.") (defvar matlab-shell-errortext-end-text "" "Text used as a signal for errors.") (defun matlab-shell-colorize-errors (&optional str) "Hook function run to colorize MATLAB errors. The filter replaces indicators with text . This strips out that text, and colorizes the region red. STR is provided by COMINT but is unused." (save-excursion (let ((start nil) (end nil) ) (goto-char (point-max)) (while (re-search-backward (regexp-quote matlab-shell-errortext-end-text) nil t) ;; Start w/ end text to make sure everything is in the buffer already. ;; Then scan for the beginning, and start there. As we delete text, locations will move, ;; so move downward after this. (if (not (re-search-backward (regexp-quote matlab-shell-errortext-start-text) nil t)) (error "Missmatched error text tokens from MATLAB") ;; Save off where we start, and delete the indicator. (setq start (match-beginning 0)) (delete-region start (match-end 0)) ;; Find the end. (if (not (re-search-forward (regexp-quote matlab-shell-errortext-end-text) nil t)) (error "Internal error scanning for error text tokens") (setq end (match-beginning 0)) (delete-region end (match-end 0)) ;; Now colorize the text. Use overlay because font-lock messes with font properties. (let ((o (matlab-make-overlay start end (current-buffer) nil nil)) ) (matlab-overlay-put o 'shellerror t) (matlab-overlay-put o 'face 'matlab-shell-error-face) ))) ;; Setup for next loop (goto-char (point-max)))))) ;;; Shell Startup (defun matlab-shell--get-emacsclient-command () "Compute how to call emacsclient so MATLAB will connect to this Emacs. Handles case of multiple Emacsen from different users running on the same system." (when (not (server-running-p)) ;; We need an Emacs server for ">> edit foo.m" which leverages to ;; emacsclient to open the file in the current Emacs session. Be ;; safe and start a server with a unique name. This ensures that ;; we don't have multiple emacs sessions stealing the server from ;; each other. (setq server-name (format "server-%d" (emacs-pid))) (message "matlab-shell: starting server with name %s" server-name) (server-start) (when (not (server-running-p)) (user-error "Unable to start server with name %s" server-name))) (let ((iq (if (eq system-type 'windows-nt) ;; Probably on Windows, probably in "Program Files" - ;; we need to quote this thing. ;; SADLY - emacs Edit command also wraps the command in ;; quotes - but we have to include arguments - so we need ;; to add internal quotes so the quotes land in the right place ;; when MATLAB adds external quotes. "\"" ""))) (concat matlab-shell-emacsclient-command iq " -n" (if server-use-tcp (concat " -f " iq (expand-file-name server-name server-auth-dir)) (concat " -s " iq (expand-file-name server-name server-socket-dir)))))) (defvar matlab-shell-use-emacs-toolbox ;; matlab may not be on path. (Name change, explicit load, etc) (let* ((mlfile (locate-library "matlab")) (dir (expand-file-name "toolbox/emacsinit.m" (file-name-directory (or mlfile ""))))) (and mlfile (file-exists-p dir))) "Add the `matlab-shell' MATLAB toolbox to the MATLAB path on startup.") (defun matlab-shell-first-prompt-fcn () "Hook run when the first prompt is seen. Sends commands to the MATLAB shell to initialize the MATLAB process." ;; Don't do this again (remove-hook 'matlab-shell-prompt-appears-hook #'matlab-shell-first-prompt-fcn) ;; Init this session of MATLAB. (if matlab-shell-use-emacs-toolbox ;; Use our local toolbox directory. (let* ((path (expand-file-name "toolbox" (file-name-directory (locate-library "matlab")))) (initcmd (expand-file-name "emacsinit" path)) (nsa (if matlab-shell-autostart-netshell "emacs.set('netshell', true);" "")) (ecc (matlab-shell--get-emacsclient-command)) (ecca (if ecc (format "emacs.set('clientcmd', '%s');" ecc) "")) (args (list nsa ecca)) (cmd (format "run('%s');%s" initcmd (apply 'concat args)))) (matlab-shell-send-command cmd) ) ;; Setup is misconfigured - we need emacsinit because it tells us how to debug (error "Unable to initialize matlab, emacsinit.m and other files missing")) ;; Init any user commands (if matlab-custom-startup-command ;; Wait for next prompt, then send. (add-hook 'matlab-shell-prompt-appears-hook #'matlab-shell-user-startup-fcn) ;; No user startup command? Wait for final prompt to signal we are done. (add-hook 'matlab-shell-prompt-appears-hook #'matlab-shell-second-prompt-fcn) )) (defun matlab-shell-user-startup-fcn () "Hook run on second prompt to run user specified startup functions." ;; Remove ourselves (remove-hook 'matlab-shell-prompt-appears-hook #'matlab-shell-user-startup-fcn) ;; Run user's startup (matlab-shell-send-command (concat matlab-custom-startup-command "")) ;; Wait for the next prompt to appear and finally set that we are ready. (add-hook 'matlab-shell-prompt-appears-hook #'matlab-shell-second-prompt-fcn) ) (defun matlab-shell-second-prompt-fcn () "Hook to run when the first prompt AFTER the call to emacsinit." (remove-hook 'matlab-shell-prompt-appears-hook #'matlab-shell-second-prompt-fcn) (setq matlab-prompt-seen t)) ;;; OUTPUT Capture ;; (declare-function matlab-shell-help-mode "matlab-topic") (defun matlab-shell-process-capture-text (str) "Process text found between and . Text is found in `matlab-shell-wrapper-filter', and then this function is called before removing text from the output stream. This function detects the type of ouptut (an eval, or output to buffer) and then processes it." (let ((start nil) (end nil) (buffname "*MATLAB Output*") (text nil) (showbuff nil) ) (save-match-data ;; Strip start anchor. (unless (string-match (regexp-quote matlab-shell-capturetext-start-text) str) (error "Capture text failed to provide start token. [%s]" str)) (setq text (substring str (match-end 0))) ;; Strip and ID the directive (eval or buffer name) (when (and (string-match "[ ]*(\\([^)\n]+\\))" text) (= (match-beginning 0) 0)) (setq buffname (match-string 1 text)) (setq text (substring text (match-end 0))) ) ;; Strip the tail. (if (string-match (regexp-quote matlab-shell-capturetext-end-text) text) (setq text (substring text 0 (match-beginning 0))) (error "Capture text failed to provide needed end token. [%s]" text)) ;; Act on the content (if (string= buffname "eval") ;; The desire is to evaluate some Emacs Lisp code instead of ;; capture output to display in Emacs. (let ((evalforms (read text))) ;; Evaluate some forms (condition-case nil (eval evalforms) (error (message "Failed to evaluate forms from MATLAB: \"%S\"" evalforms)))) ;; Generate the buffer and contents (with-current-buffer (get-buffer-create buffname) (setq buffer-read-only nil) ;; Clear it if not appending. (erase-buffer) (insert text) (goto-char (point-min)) (setq showbuff (current-buffer)) ) ;; Display the buffer (cond ((string-match "^\\*MATLAB Help" buffname) (with-current-buffer showbuff (matlab-shell-help-mode))) (t (with-current-buffer showbuff (view-mode)))) (display-buffer showbuff '((display-buffer-use-some-window display-buffer-below-selected display-buffer-at-bottom) (inhibit-same-window . t) (window-height . shrink-window-if-larger-than-buffer)))) ))) ;;; COMMANDS ;; ;; Commands for interacting with the MATLAB shell buffer (defun matlab-shell-interrupt-subjob () "Call `comint-interrupt-subjob' and flush accumulation buffer." (interactive) ;; Look at the accumulation buffer, and flush it. (setq matlab-shell-flush-accumulation-buffer t) ;; Continue on to do what comint does. (comint-interrupt-subjob) ) (defun matlab-shell-next-matching-input-from-input (n) "Get the Nth next matching input from for the command line." (interactive "p") (matlab-shell-previous-matching-input-from-input (- n))) (defun matlab-shell-previous-matching-input-from-input (n) "Get the Nth previous matching input from for the command line." (interactive "p") (end-of-line) ;; patch: Mark Histed (if (comint-after-pmark-p) (if (memq last-command '(matlab-shell-previous-matching-input-from-input matlab-shell-next-matching-input-from-input)) ;; This hack keeps the cycling working well. (let ((last-command 'comint-previous-matching-input-from-input)) (comint-next-matching-input-from-input (- n))) ;; first time. (comint-next-matching-input-from-input (- n))) ;; If somewhere else, just move around. (forward-line (- n)))) (defun matlab-shell-delete-backwards-no-prompt (&optional arg) "Delete one char backwards without destroying the matlab prompt. Optional argument ARG describes the number of chars to delete." (interactive "P") (let ((promptend (save-excursion (beginning-of-line) (if (looking-at "K?>> ") (match-end 0) (point)))) (numchars (if (integerp arg) (- arg) -1))) (if (<= promptend (+ (point) numchars)) (delete-char numchars) (error "Beginning of line")))) ;;; COMPLETION ;; ;; Request list of completions from MATLAB. ;; Support classic emacs in-place completion, or company mode if available. (defun matlab-shell-completion-list (str) "Get a list of completions from MATLAB. STR is a command substring to complete." (let* ((msbn (matlab-shell-buffer-barf-not-running)) (cmd (concat "emacsdocomplete('" str "')")) (comint-scroll-show-maximum-output nil) output (replacement-text "") (cmd-text-to-replace "") (completions nil)) (with-current-buffer msbn (if (not (matlab-on-prompt-p)) (error "MATLAB shell must be non-busy to do that")) (setq output (matlab-shell-collect-command-output cmd)) (if (not (string-match "emacs_completions_output =" output)) (error "Internal error, '%s' returned unexpected output, %s" cmd output)) (setq output (substring output (match-end 0))) (when (string-match "^'\\([^']+\\)' --> '\\([^']*\\)'" output) ;; 'CMD_TEXT_TO_REPLACE' --> 'REPLACEMENT_TEXT' ;; 'OPTION1' ;; 'OPTION2' ;; ... ;; Note, the CMD_TEXT_TO_REPLACE line is only present when there needs ;; to be replacement, e.g. imagine a command that takes glob patterns ;; >> mycmd foo*ba ;; 'foo*-bar' --> 'foo-and-bar' ;; '-or-goo' ;; '-or-too' ;; which completes to either 'foo-and-bar-or-goo' OR 'foo-and-bar-or-too'. ;; If there is only one completion that needs replacement, don't have options: ;; >> mycmd foo*ba*-too ;; 'foo*ba*-too' --> 'foo-and-bar-or-too' ;; The replacement line is not present when the completion just appends to the ;; command str, e.g. ;; >> mycmd foo-and-bar ;; '-or-goo' ;; '-or-too' (setq cmd-text-to-replace (match-string 1 output)) (setq replacement-text (match-string 2 output)) (setq output (substring output (match-end 0)))) ;; Parse the output string. (while (string-match "'" output) ;; Hack off the preceding quote (setq output (substring output (match-end 0))) (string-match "'" output) ;; we are making a completion list, so that is a list of lists. (setq completions (cons (list (substring output 0 (match-beginning 0))) completions) output (substring output (match-end 0)))) ;; Return them (list (cons 'cmd-text-to-replace cmd-text-to-replace) (cons 'replacement-text replacement-text) (cons 'completions (nreverse completions))) ))) (defun matlab-shell-get-completion-limit-pos (last-cmd completions) "Return the starting location of the common substring for completion. Used by `matlab-shell-tab' to in matching the COMPLETIONS, i.e. (substring LAST-CMD limit-pos (length last-cmd)) is the common starting substring of each completion in completions." (let ((limit-pos (length last-cmd))) (when completions (let* ((completion (car (car completions))) (i (length completion)) (chomp-num-chars nil)) (while (> i 0) (let ((part (substring completion 0 i))) (if (string-suffix-p part last-cmd) (progn (setq chomp-num-chars i) (setq i 0)) (setq i (- i 1))))) (if chomp-num-chars (setq limit-pos (- (length last-cmd) chomp-num-chars))))) limit-pos)) (defun matlab-shell-get-completion-info () "Compute completions needed for `matlab-shell-tab' and `company-matlab-shell'. Completions are computed based on the prefix on the last command prompt. No completions are provided anywhere else in the buffer." (if (or (not (= (point) (point-max))) (not (matlab-on-prompt-p))) nil ;; no completions. We can only complete when typing a command. (let ((inhibit-field-text-motion t) (last-cmd nil) (last-cmd-start-point nil) (common-substr nil) (limit-pos nil) (completions nil) (common-substr-start-pt nil) (common-substr-end-pt nil) (did-completion nil)) ;; Load last-cmd which is the command we are completing on. ;; We need to avoid altering point because when we ask for completions, we send ;; emacsdocomplete(last-cmd-quoted) to the MATLAB command window and then grab the results ;; and erase them. (save-excursion (goto-char (point-max)) (beginning-of-line) (re-search-forward comint-prompt-regexp) (setq last-cmd-start-point (point)) ;; save the old (last) command (setq last-cmd (buffer-substring (point) (matlab-point-at-eol)))) ;; Get the list of completions. ;; When obtaining completions, we can't use save-excursion because we are ;; manipulating the text in the *MATLAB* window at the point and this ;; move point-marker which causes save-excursion to move to the wrong ;; location. We need to do this before we manipulate the text in the ;; *MATLAB* buffer because `matlab-shell-completion-list' sends ;; emacsdocompletion('statement') to matlab and matlab produces output in ;; the *MATLAB* buffer, then `matlab-shell-completion-list' removes the ;; output from the *MATLAB* buffer. (let ((last-cmd-quoted last-cmd)) ;; Load last-cmd-quoted which the expression typed (e.g. "!mv file."). ;; Note, this has single quotes doubled up so we can ask ;; MATLAB for completions on last-cmd-quoted. (while (string-match "[^']\\('\\)\\($\\|[^']\\)" last-cmd-quoted) (setq last-cmd-quoted (replace-match "''" t t last-cmd-quoted 1))) (let* ((completion-list (matlab-shell-completion-list last-cmd-quoted)) (cmd-text-to-replace (cdr (assoc 'cmd-text-to-replace completion-list)))) (setq completions (cdr (assoc 'completions completion-list))) (when cmd-text-to-replace ;; need to alter the command to replace replacement-text with the common substring (let ((replacement-text (cdr (assoc 'replacement-text completion-list))) (last-cmd-start-len (- (length last-cmd) (length cmd-text-to-replace)))) ;; Replace the text typed in the *MATLAB* and update last-cmd (goto-char (+ last-cmd-start-point last-cmd-start-len)) (delete-region (point) (matlab-point-at-eol)) (insert replacement-text) (setq last-cmd (concat (substring last-cmd 0 last-cmd-start-len) replacement-text)) (if (not completions) (setq did-completion t)) )))) ;; Consider ;; >> ! touch foo.ext1 foo.ext2 ;; >> ! mv foo. ;; 'completions' will contain (("foo.ext1") ("foo.ext2")) and ;; common-substr will be "foo." which is used in displaying the ;; completions. The limit-pos in this case will be 5 and ;; last-cmd "! mv foo." (setq limit-pos (matlab-shell-get-completion-limit-pos last-cmd completions)) (setq common-substr (substring last-cmd limit-pos)) ;; Mark the subfield of the completion result so we can say no completions ;; if there aren't any otherwise we need to remove it. (save-excursion (goto-char (point-max)) (beginning-of-line) (re-search-forward comint-prompt-regexp) (setq common-substr-start-pt (+ (point) limit-pos)) (setq common-substr-end-pt (matlab-point-at-eol)) (if (and (eq (length completions) 1) (string-equal (buffer-substring-no-properties common-substr-start-pt common-substr-end-pt) (car (car completions)))) (setq completions nil))) ;; force display of "No completions" ;; Result (list (cons 'last-cmd last-cmd) (cons 'common-substr common-substr) (cons 'limit-pos limit-pos) (cons 'completions completions) (cons 'common-substr-start-pt common-substr-start-pt) (cons 'common-substr-end-pt common-substr-end-pt) (cons 'did-completion did-completion) )))) (defun matlab-shell-c-tab () "Send [TAB] to the currently running matlab process and retrieve completions." (interactive) (let ((matlab-shell-tab-company-available nil)) (matlab-shell-tab))) ;; matlab-shell-tab, ;; This sends the command text at the prompt to emacsdocomplete.m which returns a list ;; of possible completions. To do this we use comint to 'type' emacsdocomplete(command) ;; in the *MATLAB* buffer and then we extract the result. The emacsdocomplete returns ;; a list of possible completions of the command where each completion starts with ;; zero or more characters of the command "suffix". For example, give a directory ;; containing files, foo.ext1 and foo.ext2, ;; >> ! mv foo. ;; will call emacsdocomplete('! mv foo.') which returns (("foo.ext1") ("foo.ext2")) ;; where we have four characters "foo." matching the suffix of command. There can ;; be zero suffix match as in ;; >> !ls /usr/ ;; which on Linux returns a long list of items e.g. (("bin", "include", ...)) ;; ;; ;; Test cases (using R2016b): ;; ;; >> h=figure; ;; >> h.Num Should show Number ;; >> h.Number Should show Number and NumberTitle ;; >> h.Num Should do same. The extra white space shouldn't mess things up. ;; ;; >> h.NumberTitle Should display message "No completions" ;; >> set(h,' Should display a long list ;; type P Should narrow to Parent, Position, ... ;; ;; >> !touch file.ext Assuming no other fil* names in current directory. ;; >> !mv file. Should complete to file.ext ;; >> !mv file.ext Should do nothing ;; ;; >> !/usr/b Should complete to /usr/bin ;; >> !/usr/bin/cpp-4. Should complete to something like /usr/bin/cpp-4.9 ;; ;; >> ls /usr/include/byteswap. Some file with a '.' should complete correctly ;; ;; >> !touch foo.ext1 foo.ext2 ;; >> ! mv foo. Should give options foo.ext1 foo.ext2 ;; >> ! mv foo.ext1 Should say no completions ;; >> ! mv foo.ext1 Should say no completions (note the space before the TAB) ;; ;; >> vdp ;; >> get_param('vdp','Pos Should show several completions (defun matlab-shell-tab () "Perform completions at the `matlab-shell' command prompt. By default, uses `matlab-shell' toolbox command emacsdocomplete.m to get completions. If `matlab-shell-ask-MATLAB-for-completions' is nil, then use `comint-dynamic-complete-filename' instead. If `matlab-shell-tab-use-company' is non-nil, and if `company-mode' is installed, then use company to display completions in a popup window." (interactive) (cond ;; If we aren't supposed to ask MATLAB for completions, then use ;; comint basics. ((not matlab-shell-ask-MATLAB-for-completions) (call-interactively 'comint-dynamic-complete-filename)) ;; If company mode is available and we ask for it, use that. ((and matlab-shell-tab-company-available matlab-shell-tab-use-company company-mode) ;; We don't add to company-backends because we bind TAB to matlab-shell-tab ;; which means completions must be explicitly requested. The default ;; company-complete tries to complete as you type which doesn't work ;; so well because it can take MATLAB a bit to compute completions. (call-interactively 'company-matlab-shell)) ;; Starting in Emacs 23, completion-in-region has everything we need for basic ;; in-buffer completion ((fboundp 'completion-in-region) (matlab-shell-do-completion-light)) ;; Old school completion (t (matlab-shell-do-completion)) )) (defun matlab-shell-do-completion-light () "Perform completion using `completion-in-region'." (let* ((inhibit-field-text-motion t) (completion-info (matlab-shell-get-completion-info)) (completions (cdr (assoc 'completions completion-info))) (common-substr-start-pt (cdr (assoc 'common-substr-start-pt completion-info))) (common-substr-end-pt (cdr (assoc 'common-substr-end-pt completion-info))) ) (completion-in-region common-substr-start-pt common-substr-end-pt completions))) (defun matlab-shell-do-completion () "Perform completion using Emacs buffers. This should work in version before `completion-in-region' was available." (let* ((inhibit-field-text-motion t) (completion-info (matlab-shell-get-completion-info)) ;;(last-cmd (cdr (assoc 'last-cmd completion-info))) (common-substr (cdr (assoc 'common-substr completion-info))) (limit-pos (cdr (assoc 'limit-pos completion-info))) (completions (cdr (assoc 'completions completion-info))) (common-substr-start-pt (cdr (assoc 'common-substr-start-pt completion-info))) (common-substr-end-pt (cdr (assoc 'common-substr-end-pt completion-info))) (did-completion (cdr (assoc 'did-completion completion-info)))) (when (not did-completion) ;; Whack the old command 'substring' that is starting part of the ;; completions so we can insert it back later (delete-region common-substr-start-pt common-substr-end-pt) (goto-char (point-max)) ;; Process the completions (if (eq (length completions) 1) ;; If there is only one, then there is an obvious thing to do. (progn (insert (car (car completions))) ;; kill completions buffer if still visible (matlab-shell-tab-hide-completions)) ;; else handle multiple completions (let ((try nil)) (setq try (try-completion common-substr completions)) ;; Insert in a good completion. (cond ((or (eq try nil) (eq try t) (and (stringp try) (string= try common-substr))) (insert common-substr) (let ((cbuff (get-buffer-create "*Completions*"))) (with-output-to-temp-buffer cbuff (matlab-display-completion-list (mapcar 'car completions) common-substr)) (display-buffer cbuff '((display-buffer-below-selected display-buffer-at-bottom) (inhibit-same-window . t) (window-height . fit-window-to-buffer)) ) )) ((stringp try) (insert try) (matlab-shell-tab-hide-completions)) (t (insert common-substr)))) )))) (defun matlab-shell-tab-hide-completions () "Hide any completion windows for `matlab-shell-tab'." (let ((bw (get-buffer-window "*Completions*"))) (when bw (quit-window nil (get-buffer-window "*Completions*"))))) ;;; Find Files ;; ;; Finding Files with MATLAB shell. ;; Originally for use with semantic-matlab, but now used in more places. (defun matlab-shell-which-fcn (fcn) "Get the location of FCN's M file. Returns an alist: ( LOCATION . BUILTINFLAG ) LOCATION is a string indicating where it is, and BUILTINFLAG is non-nil if FCN is a builtin." (save-excursion (let* ((msbn (matlab-shell-buffer-barf-not-running)) (cmd (format "disp(which('%s'))" fcn)) (comint-scroll-show-maximum-output nil) output builtin ) (set-buffer msbn) (goto-char (point-max)) (if (not (matlab-on-prompt-p)) (error "MATLAB shell must be non-busy to do that")) (setq output (matlab-shell-collect-command-output cmd)) ;; BUILT-IN (cond ((string-match "built-in (\\([^)]+\\))" output) (cons (concat (substring output (match-beginning 1) (match-end 1)) ".m") t)) ;; Error ((string-match "not found" output) nil) ;; JUST AN M FILE (t (string-match "$" output) (cons (substring output 0 (match-beginning 0)) nil)))))) (defun matlab-shell-locate-fcn (fcn) "Run \"which FCN\" in the `matlab-shell', then open the file." (interactive (list (let ((default (matlab-read-word-at-point))) (if (and default (not (equal default ""))) (let ((s (read-string (concat "MATLAB locate fcn (default " default "): ")))) (if (string= s "") default s)) (read-string "MATLAB locate fcn: "))))) (let ((file (matlab-shell-which-fcn fcn))) (if file (find-file (car file)) (error "Command which('%s') returned empty" fcn)))) (defvar matlab-shell-matlabroot-run nil "Cache of MATLABROOT in this shell.") (make-variable-buffer-local 'matlab-shell-matlabroot-run) (defun matlab-shell-matlabroot () "Get the location of this shell's root. Returns a string path to the root of the executing MATLAB." (save-excursion (let* ((msbn (matlab-shell-buffer-barf-not-running)) (cmd "disp(matlabroot)") (comint-scroll-show-maximum-output nil) output builtin ) (set-buffer msbn) (goto-char (point-max)) (if matlab-shell-matlabroot-run matlab-shell-matlabroot-run ;; If we haven't cached it, calculate it now. (if (not (matlab-on-prompt-p)) (error "MATLAB shell must be non-busy to do that")) (setq output (matlab-shell-collect-command-output cmd)) (string-match "$" output) (setq matlab-shell-matlabroot-run (substring output 0 (match-beginning 0))))))) ;;; MATLAB Shell Commands ===================================================== ;; ;; These commands will use matlab-shell as a utility, capture and display output. (defun matlab-read-word-at-point () "Get the word closest to point, but do not change position. Has a preference for looking backward when not directly on a symbol. Snatched and hacked from dired-x.el" (let ((word-chars "a-zA-Z0-9_") (bol (matlab-point-at-bol)) (eol (matlab-point-at-eol)) start) (save-excursion ;; First see if just past a word. (if (looking-at (concat "[" word-chars "]")) nil (skip-chars-backward (concat "^" word-chars "{}()\[\]") bol) (if (not (bobp)) (backward-char 1))) (if (numberp (string-match (concat "[" word-chars "]") (char-to-string (following-char)))) (progn (skip-chars-backward word-chars bol) (setq start (point)) (skip-chars-forward word-chars eol)) (setq start (point))) ; If not found, return empty string (buffer-substring start (point))))) (defun matlab-read-line-at-point () "Get the line under point, if command line." (if (eq major-mode 'matlab-shell-mode) (save-excursion (let ((inhibit-field-text-motion t)) (beginning-of-line) (if (not (looking-at (concat comint-prompt-regexp))) "" (search-forward-regexp comint-prompt-regexp) (buffer-substring (point) (matlab-point-at-eol))))) (save-excursion (buffer-substring-no-properties (matlab-scan-beginning-of-command) (matlab-scan-end-of-command))))) (defun matlab-non-empty-lines-in-string (str) "Return number of non-empty lines in STR." (let ((count 0) (start 0)) (while (string-match "^.+$" str start) (setq count (1+ count) start (match-end 0))) count)) (declare-function matlab-shell-help-mode "matlab-topic") (defun matlab-output-to-temp-buffer (buffer output) "Print output to temp buffer, or a message if empty string. BUFFER is the buffer to output to, and OUTPUT is the text to insert." (let ((lines-found (matlab-non-empty-lines-in-string output))) (cond ((= lines-found 0) (message "(MATLAB command completed with no output)")) ((= lines-found 1) (string-match "^.+$" output) (message (substring output (match-beginning 0)(match-end 0)))) (t (with-output-to-temp-buffer buffer (princ output)) (with-current-buffer buffer (matlab-shell-help-mode)))))) (defun matlab-shell-run-command (command) "Run COMMAND and display result in a buffer. This command requires an active MATLAB shell." (interactive (list (read-from-minibuffer "MATLAB command line: " (cons (matlab-read-line-at-point) 0)))) (let ((doc (matlab-shell-collect-command-output command))) (matlab-output-to-temp-buffer "*MATLAB Help*" doc))) (defun matlab-shell-describe-variable (variable) "Get the contents of VARIABLE and display them in a buffer. This uses the WHOS (MATLAB 5) command to find viable commands. This command requires an active MATLAB shell." (interactive (list (read-from-minibuffer "MATLAB variable: " (cons (matlab-read-word-at-point) 0)))) (let ((doc (matlab-shell-collect-command-output (concat "whos " variable)))) (matlab-output-to-temp-buffer "*MATLAB Help*" doc))) (defun matlab-shell-describe-command (command) "Describe COMMAND textually by fetching it's doc from the MATLAB shell. This uses the lookfor command to find viable commands. This command requires an active MATLAB shell." (interactive (let ((fn (matlab-function-called-at-point)) val) (setq val (read-string (if fn (format "Describe function (default %s): " fn) "Describe function: "))) (if (string= val "") (list fn) (list val)))) (let ((doc (matlab-shell-collect-command-output (concat "help -emacs " command)))) (matlab-output-to-temp-buffer "*MATLAB Help*" doc))) (defun matlab-shell-apropos (matlabregex) "Look for any active commands in MATLAB matching MATLABREGEX. This uses the lookfor command to find viable commands." (interactive (list (read-from-minibuffer "MATLAB command subexpression: " (cons (matlab-read-word-at-point) 0)))) (let ((ap (matlab-shell-collect-command-output (concat "lookfor " matlabregex)))) (matlab-output-to-temp-buffer "*MATLAB Apropos*" ap))) (defun matlab-on-prompt-p () "Return t if we MATLAB can accept input." (save-excursion (let ((inhibit-field-text-motion t)) (goto-char (point-max)) (beginning-of-line) (looking-at comint-prompt-regexp)))) (defun matlab-on-empty-prompt-p () "Return t if we MATLAB is on an empty prompt." (with-current-buffer (matlab-shell-active-p) (let ((inhibit-field-text-motion t)) (goto-char (point-max)) (beginning-of-line) (looking-at (concat comint-prompt-regexp "\\s-*$"))))) (defun matlab-on-debug-prompt-p () "Return t if we MATLAB is on an debug prompt." (with-current-buffer (matlab-shell-active-p) (let ((inhibit-field-text-motion t)) (goto-char (point-max)) (beginning-of-line) (looking-at (concat "K>>\\s-*"))))) (defun matlab-shell-buffer-barf-not-running () "Return a running MATLAB buffer iff it is currently active." (or (matlab-shell-active-p) (error "You need to run the command `matlab-shell' to do that!"))) (defun matlab-shell-collect-command-output (command) "If there is a MATLAB shell, run the MATLAB COMMAND and return it's output. It's output is returned as a string with no face properties. The text output of the command is removed from the MATLAB buffer so there will be no indication that it ran." (let ((msbn (matlab-shell-buffer-barf-not-running)) (matlab-shell-suppress-prompt-hooks t)) ;; We are unable to use save-excursion to save point position because we are ;; manipulating the *MATLAB* buffer by erasing the current text typed at the ;; MATLAB prompt (where point is) and then we send command to MATLAB and ;; grab the result. After this we erase the output from command and then ;; restore the current text at the MATLAB prompt and move to start-point. ;; Note, save-excursion works by tracking `point-marker' and when you manipulate ;; the text at point, `point-marker' moves causing save-excursion to move ;; the point in to a location we don't want. See: ;; http://emacs.stackexchange.com/questions/7574/why-save-excursion-doesnt-save-point-position ;; Ideally there would be some way to prevent the *MATLAB* buffer from refreshing ;; as we are interacting with it, but I couldn't figure out a way to do that. (with-current-buffer msbn (save-window-excursion (let ((pos nil) (str nil) (lastcmd) (inhibit-field-text-motion t) (start-point (point))) (if (not (matlab-on-prompt-p)) (error "MATLAB shell must be non-busy to do that")) ;; Save the old command (goto-char (point-max)) (beginning-of-line) (re-search-forward comint-prompt-regexp) ;; Backup if there are extra spaces. To see why, try tab completion on command with ;; leading spaces, e.g. ;; >> h=figure; ;; >> h.Num (re-search-backward ">") (forward-char 2) (setq lastcmd (buffer-substring (point) (matlab-point-at-eol))) (delete-region (point) (matlab-point-at-eol)) ;; We are done error checking, run the command. (setq pos (point)) (let ((output-start-char ;; We didn't get enough output until we are past the starting point. ;; Starting point depends on if we echo or not. (if matlab-shell-echoes (+ pos 1 (string-width command)) ; 1 is newline pos)) (notimeout t) ) ;; Note, comint-simple-send in emacs 24.4 appends a newline and code below assumes ;; one prompt indicates command completed, so don't append a newline. (comint-simple-send (get-buffer-process (current-buffer)) command) ;; Wait for the command to finish, by looking for new prompt. (goto-char (point-max)) ;; Turn on C-g by using with-local-quit. This is needed to prevent message: ;; "Blocking call to accept-process-output with quit inhibited!! [115 times]" ;; when using `company-matlab-shell' for TAB completions. (with-local-quit (while (or (>= output-start-char (point)) (not (matlab-on-empty-prompt-p)) notimeout) (setq notimeout (accept-process-output (get-buffer-process (current-buffer)) .1)) (goto-char (point-max)))) ;; Get result of command into str (goto-char pos) (setq str (buffer-substring-no-properties (save-excursion (goto-char output-start-char) (point)) (save-excursion (goto-char (point-max)) (beginning-of-line) (point)))) ) ;; delete the result of command (delete-region pos (point-max)) ;; restore contents of buffer so it looks like nothing happened. (insert lastcmd) (goto-char start-point) ;; return result 'string' from executing MATLAB command str))))) (defun matlab-shell-send-command (command) "Send COMMAND to a MATLAB process. If there is a `matlab-shell', send it to the command prompt. If there is only a `matlab-netshell', send it to the netshell." (if (matlab-shell-active-p) (with-current-buffer (matlab-shell-active-p) (matlab-shell-send-string (concat command "\n"))) ;; As a backup, use netshell. (matlab-netshell-eval command))) (defun matlab-shell-send-string (string) "Send STRING to the currently running matlab process." (if (not matlab-shell-echoes) (let ((proc (get-buffer-process (current-buffer)))) (goto-char (point-max)) (insert string) (set-marker (process-mark proc) (point)))) (when matlab-shell-io-testing (message "<--[%s]" string)) (comint-send-string (get-buffer-process (current-buffer)) string)) (defun matlab-url-at (p) "Return the matlab-url overlay at P, or nil." (let ((url nil) (o (matlab-overlays-at p))) (while (and o (not url)) (setq url (matlab-overlay-get (car o) 'matlab-url) o (cdr o))) url)) (defun matlab-url-stack-top-at (p) "Return the matlab-url overlay at P, or nil." (let ((url nil) (o (matlab-overlays-at p))) (while (and o (not url)) (setq url (or (matlab-overlay-get (car o) 'first-in-error-stack) (matlab-overlay-get (car o) 'matlab-url)) o (cdr o))) url)) (defun matlab-shell-previous-matlab-url (&optional stacktop) "Find a previous occurrence of an overlay with a MATLAB URL. If STACKTOP is non-nil, then also get the top of some stack, which didn't show up in reverse order." (save-excursion (let ((url nil) (o nil) (p (point))) (while (and (not url) (setq p (matlab-previous-overlay-change p)) (not (eq p (point-min)))) (setq url (if stacktop (matlab-url-stack-top-at p) (matlab-url-at p)))) url))) ;; (matlab-shell-mref-to-filename "eltest.utils.testme>localfcn") (defun matlab-shell-class-mref-to-file (mref &optional fcn-p) "Convert a class like reference MREF to a file name. Optional FCN-P indicates specifies to force treating as a function." (let* ((LF (split-string mref ">")) (S (split-string (car LF) "\\.")) (L (last S)) (ans nil)) (if (member L '("mlx" "m")) nil ;; Not a . from a .m file, probably a class ?? (while S (when (and (= (length S) 1) (not fcn-p)) ;; Is there is a method? strip it off. (let ((meth (split-string (car S) "/"))) (setq S (list (car meth))))) ;; Append the parts together. (setq ans (concat ans (if (> (length S) 1) "+" (unless fcn-p (concat "@" (car S) "/"))) (car S))) (setq S (cdr S)) (if S (setq ans (concat ans "/")) (setq ans (concat ans ".m"))) )) ans)) (defun matlab-shell-mref-which-fcn (ref) "Try to run 'which' on REF to find actual file location. If the MATLAB shell isn't ready to run a which command, skip and return nil." (when (not matlab-shell-in-process-filter) (save-excursion (let* ((msbn (matlab-shell-buffer-barf-not-running))) (set-buffer msbn) (goto-char (point-max)) (if (and (matlab-on-prompt-p) (not matlab-shell-cco-testing)) (matlab-shell-which-fcn ref) nil))))) (defvar matlab-shell-mref-converters '( ;; Does it work as is? (lambda (mref) mref) ;; p files (lambda (mref) (when (string-match "\\.\\(p\\)$" mref) (replace-match "m" nil t mref 1))) ;; Function name, no extension. (lambda (mref) (when (not (string-match "\\.m$" mref)) (concat mref ".m"))) ;; Methods in a class (lambda (mref) (when (string-match "\\." mref) (matlab-shell-class-mref-to-file mref))) ;; A function in a package (lambda (mref) (when (string-match "\\." mref) (matlab-shell-class-mref-to-file mref t))) ;; Copied from old code, not sure what it matches. (lambda (mref) (when (string-match ">" mref) (concat (substring fileref 0 (match-beginning 0)) ".m"))) ;; Ask matlab where it came from. Keep last b/c expensive, or won't ;; work if ML is busy. (lambda (mref) (car (matlab-shell-mref-which-fcn mref))) ) "List of converters to convert MATLAB file references into a filename. Each element is a function that accepts a file ref, and returns a file name, or nil if no conversion done.") ;; (matlab-shell-mref-to-filename "eltest.utils.testme>localfcn") (defun matlab-shell-mref-to-filename (fileref) "Convert the MATLAB file reference FILEREF into an actual file name. MATLAB can refer to functions on the path by a short name, or by a .p extension, and a host of different ways. Convert this reference into something Emacs can load." (interactive "sFileref: ") (with-current-buffer (matlab-shell-active-p) (let ((C matlab-shell-mref-converters) (ans nil)) (while (and C (not ans)) (let ((tmp (funcall (car C) fileref))) (when (and tmp (file-exists-p tmp)) (setq ans tmp)) ) (setq C (cdr C))) (when (called-interactively-p 'any) (message "Found: %S" ans)) ans))) (defun matlab-find-other-window-file-line-column (ef el ec &optional debug) "Find file EF in other window and to go line EL and 1-basec column EC. If DEBUG is non-nil, then setup GUD debugging features." (let ((ef-converted (matlab-shell-mref-to-filename ef))) (when (not ef-converted) (error "Failed to translate %s into a filename" ef)) (find-file-other-window ef-converted) (goto-char (point-min)) (forward-line (1- (string-to-number el))) (when debug (setq gud-last-frame (cons (buffer-file-name) (string-to-number el))) (gud-display-frame)) (setq ec (string-to-number ec)) (if (> ec 0) (forward-char (1- ec))))) ;; TODO: No callers use DEBUG input Remove? (defun matlab-find-other-window-via-url (url &optional debug) "Find other window using matlab URL and optionally set DEBUG cursor." (cond ((string-match "^error:\\(.*\\),\\([0-9]+\\),\\([0-9]+\\)$" url) (let ((ef (substring url (match-beginning 1) (match-end 1))) (el (substring url (match-beginning 2) (match-end 2))) (ec (substring url (match-beginning 3) (match-end 3)))) (matlab-find-other-window-file-line-column ef el ec debug))) ((string-match "opentoline('\\([^']+\\)',\\([0-9]+\\),\\([0-9]+\\))" url) (let ((ef (substring url (match-beginning 1) (match-end 1))) (el (substring url (match-beginning 2) (match-end 2))) (ec (substring url (match-beginning 3) (match-end 3)))) (matlab-find-other-window-file-line-column ef el ec debug))) ((string-match "^matlab:*\\(.*\\)$" url) (process-send-string (get-buffer-process gud-comint-buffer) (concat (substring url (match-beginning 1) (match-end 1)) "\n"))))) (defun matlab-shell-last-error () "In the MATLAB interactive buffer, find the last MATLAB error, and go there. To reference old errors, put the cursor just after the error text." (interactive) (catch 'done (let ((url (matlab-shell-previous-matlab-url t))) (if url (progn (matlab-find-other-window-via-url url) (throw 'done nil)) (save-excursion (end-of-line) ;; In case we are before the line number 1998/06/05 16:54sk (let ((err (matlab-shell-scan-for-error (point-min)))) (when (not err) (error "No errors found!")) (let ((ef (nth 2 err)) (el (nth 3 err)) (ec (or (nth 4 err) "0"))) (matlab-find-other-window-file-line-column ef el ec)))))))) (defun matlab-shell-html-click (e) "Go to the error at the location of event E." (interactive "e") (mouse-set-point e) (matlab-shell-html-go)) (defun matlab-shell-html-go () "Go to the error at the location `point'." (interactive) (let ((url (matlab-url-at (point)))) (if url (matlab-find-other-window-via-url url)))) (defun matlab-shell-dbstop-error () "Stop on errors." (interactive) (comint-send-string (get-buffer-process (current-buffer)) "dbstop if error\n")) (defun matlab-shell-dbclear-error () "Don't stop on errors." (interactive) (comint-send-string (get-buffer-process (current-buffer)) "dbclear if error\n")) (defun matlab-shell-demos () "MATLAB demos." (interactive) (comint-send-string (get-buffer-process (current-buffer)) "demo\n")) (defun matlab-shell-close-figures () "Close any open figures." (interactive) (comint-send-string (get-buffer-process (current-buffer)) "close all\n")) (defun matlab-shell-close-current-figure () "Close current figure." (interactive) (comint-send-string (get-buffer-process (current-buffer)) "delete(gcf)\n")) (defun matlab-shell-sync-buffer-directory () "Sync matlab-shell `default-directory' with MATLAB's pwd. These will differ when MATLAB code directory without notifying Emacs." (interactive) (comint-send-string (get-buffer-process (current-buffer)) "emacscd%%\n")) (defun matlab-shell-exit () "Exit MATLAB shell." (interactive) (comint-send-string (get-buffer-process (current-buffer)) "exit\n") (kill-buffer nil)) ;;; MATLAB mode Shell commands ================================================ ;; ;; These commands are provided in MATLAB code buffers to interact with ;; the shell. (defun matlab-show-matlab-shell-buffer () "Switch to the buffer containing the matlab process." (interactive) (let ((msbn (concat "*" matlab-shell-buffer-name "*"))) (if (get-buffer msbn) (switch-to-buffer-other-window msbn) (message "There is not an active MATLAB process.")))) (defvar matlab-shell-save-and-go-history '("()") "Keep track of parameters passed to the MATLAB shell.") (defvar matlab-shell-save-and-go-command nil "Command to use for `matlab-shell-save-and-go' instead of current buffer. This command will override the default computed command if non-nil. The command will be run in the shell's current directory without checks, so you will need to make sure MATLAB's pwd is correct. It is recommended you use directory-local or buffer-local variable settings to control this.") (make-variable-buffer-local 'matlab-shell-save-and-go-command) ;; Marking as SAFE b/c we will ask to use this before doing so. (put 'matlab-shell-save-and-go-command 'safe-local-variable #'stringp) (defvar matlab-shell-save-and-go-command-enabled nil "Remember if it is safe to use `matlab-shell-save-and-go-command' in this buffer.") (make-variable-buffer-local 'matlab-shell-save-and-go-command-enabled) (put 'matlab-shell-save-and-go-command 'risky-local-variable t) (defun matlab-shell-set-save-and-go-command (command) "Set `matlab-shell-save-and-go-command' for any file in the current directory. Value is set to COMMAND." (interactive (list (read-string "sCommand: " (file-name-sans-extension (file-name-nondirectory (buffer-file-name)))))) (when (not (eq major-mode 'matlab-mode)) (error "Cannot set save-and-go command for buffer in %s" major-mode)) (add-dir-local-variable 'matlab-mode 'matlab-shell-save-and-go-command command)) (defun matlab-shell-add-to-input-history (string) "Add STRING to the input-ring and run `comint-input-filter-functions' on it. Similar to `comint-send-input'." (if (and (funcall comint-input-filter string) (or (null comint-input-ignoredups) (not (ring-p comint-input-ring)) (ring-empty-p comint-input-ring) (not (string-equal (ring-ref comint-input-ring 0) string)))) (ring-insert comint-input-ring string)) (run-hook-with-args 'comint-input-filter-functions (concat string "\n")) (if (boundp 'comint-save-input-ring-index);only bound in GNU emacs (setq comint-save-input-ring-index comint-input-ring-index)) (setq comint-input-ring-index nil)) (defun matlab-shell-save-and-go () "Save this M file, and evaluate it in a MATLAB shell." (interactive) (if (not (eq major-mode 'matlab-mode)) (error "Save and go is only useful in a MATLAB buffer!")) (if (not (buffer-file-name (current-buffer))) (call-interactively 'write-file)) (let* ((fn-name (file-name-sans-extension (file-name-nondirectory (buffer-file-name)))) (msbn (concat "*" matlab-shell-buffer-name "*")) (do-local t)) (when matlab-shell-save-and-go-command ;; If an override command is set, run that instead of this file. (let* ((cmd matlab-shell-save-and-go-command) (use (or matlab-shell-save-and-go-command-enabled (string= cmd fn-name) (y-or-n-p (format "Run \"%s\" instead of %s? " cmd fn-name))))) (if (not use) ;; Revert to old behavior. nil ;; Else, use it. (setq do-local nil matlab-shell-save-and-go-command-enabled t) ;; No buffer? No net connection? Make a shell! (if (and (not (get-buffer msbn)) (not (matlab-netshell-active-p))) (matlab-shell)) (when (get-buffer msbn) ;; Ok, now fun the function in the matlab shell (if (get-buffer-window msbn t) (select-window (get-buffer-window msbn t)) (switch-to-buffer-other-window (concat "*" matlab-shell-buffer-name "*"))) (goto-char (point-max))) (matlab-shell-send-command (concat cmd "\n")) ))) (when do-local ;; else - try to make something up to run this specific command. (let* ((dir (expand-file-name (file-name-directory buffer-file-name))) (edir dir) (change-cd matlab-change-current-directory) (param "")) (save-buffer) ;; Do we need parameters? (if (save-excursion (goto-char (point-min)) (end-of-line) (forward-sexp -1) (looking-at "([a-zA-Z]")) (setq param (read-string "Parameters: " (car matlab-shell-save-and-go-history) 'matlab-shell-save-and-go-history))) ;; No buffer? No net connection? Make a shell! (if (and (not (get-buffer msbn)) (not (matlab-netshell-active-p))) (matlab-shell)) (when (get-buffer msbn) ;; Ok, now fun the function in the matlab shell (if (get-buffer-window msbn t) (select-window (get-buffer-window msbn t)) (switch-to-buffer-other-window (concat "*" matlab-shell-buffer-name "*"))) (goto-char (point-max))) ;; Fixup DIR to be a valid MATLAB command (mapc (lambda (e) (while (string-match (car e) dir) (setq dir (replace-match (format "', char(%s), '" (cdr e)) t t dir)))) '(("ô" . "244") ("é" . "233") ("è" . "232") ("à" . "224"))) ;; change current directory? - only w/ matlab-shell active. (if (and change-cd (get-buffer msbn)) (progn (when (not (string= dir default-directory)) (matlab-shell-send-command (concat "emacscd(['" dir "'])"))) (let ((cmd (concat fn-name " " param))) (matlab-shell-add-to-input-history cmd) (matlab-shell-send-string (concat cmd "\n")) )) ;; If not changing dir, maybe we need to use 'run' command instead? (let* ((match 0) (tmp (while (setq match (string-match "'" param match)) (setq param (replace-match "''" t t param)) (setq match (+ 2 match)))) (cmd (concat "emacsrun('" dir fn-name "'" (if (string= param "") "" (concat ", '" param "'")) ")"))) (matlab-shell-send-command cmd))) )))) ;;; Running buffer subset ;; ;; Run some subset of the buffer in matlab-shell. (defun matlab-shell-run-cell () "Run the cell the cursor is in." (interactive) (let ((start (save-excursion (forward-page -1) (if (looking-at "function") (error "You are not in a cell. Try `matlab-shell-save-and-go' instead")) (when (matlab-line-comment-p (matlab-compute-line-context 1)) ;; Skip over starting comment from the current cell. (matlab-end-of-command) (end-of-line) (forward-char 1)) (point))) (end (save-excursion (forward-page 1) (when (matlab-line-comment-p (matlab-compute-line-context 1)) (beginning-of-line) (forward-char -1)) (point)))) (matlab-shell-run-region start end t))) (defun matlab-shell-run-region-or-line () "Run region from BEG to END and display result in MATLAB shell. pIf region is not active run the current line. This command requires an active MATLAB shell." (interactive) (if (and transient-mark-mode mark-active) (matlab-shell-run-region (mark) (point)) (matlab-shell-run-region (matlab-point-at-bol) (matlab-point-at-eol)))) (defun matlab-shell-run-region (beg end &optional noshow) "Run region from BEG to END and display result in MATLAB shell. If NOSHOW is non-nil, replace newlines with commas to suppress output. This command requires an active MATLAB shell." (interactive "r") (if (> beg end) (let (mid) (setq mid beg beg end end mid))) (let ((command (matlab-shell-region-command beg end noshow)) (msbn nil) (lastcmd) (inhibit-field-text-motion t)) (if (matlab-netshell-active-p) ;; Use netshell to run the command. (matlab-netshell-eval command) ;; else, send to the command line. (save-excursion (setq msbn (matlab-shell-buffer-barf-not-running)) (set-buffer msbn) (if (not (matlab-on-prompt-p)) (error "MATLAB shell must be non-busy to do that")) ;; Save the old command (beginning-of-line) (re-search-forward comint-prompt-regexp) (setq lastcmd (buffer-substring (point) (matlab-point-at-eol))) (delete-region (point) (matlab-point-at-eol)) ;; We are done error checking, run the command. (matlab-shell-send-string command) ;; Put the old command back. (insert lastcmd))) ;; Regardless of how we send it, if there is a shell buffer, show it. (setq msbn (matlab-shell-active-p)) (when msbn (set-buffer msbn) (goto-char (point-max)) (display-buffer msbn '((display-buffer-reuse-window display-buffer-at-bottom) (reusable-frames . visible) )) ))) ;;; Convert regions to runnable text ;; ;; There are two techniques. ;; Option 1: Convert the region into a single command line, suppress output, and eval. ;; Option 2: Newer emacs, use `emacsrunregion.m' to use Editor hack for running regions out of a file. ;; Option 3: Older emacs, or if buffer isn't saved in a file. Copy into a script, and run the script. (defun matlab-shell-region-command (beg end &optional noshow) "Convert the region between BEG and END into a MATLAB command. Picks between different options for running the commands. Optional argument NOSHOW specifies if we should echo the region to the command line." (cond ((eq matlab-shell-run-region-function 'auto) (let ((cnt (count-lines beg end))) (if (< cnt 2) ;; OLD WAY (matlab-shell-region->commandline beg end noshow) ;; else ;; NEW WAYS (if (file-exists-p (buffer-file-name (current-buffer))) (progn (save-buffer) (matlab-shell-region->internal beg end noshow)) ;; No file, or older emacs, run region as tmp file. (matlab-shell-region->script beg end noshow))) )) (t (funcall matlab-shell-run-region-function beg end noshow)))) (defun matlab-shell-region->commandline (beg end &optional noshow) "Convert the region between BEG and END into a MATLAB command. Squeeze out newlines. When NOSHOW is non-nil, suppress output by adding ; to commands." ;; Assume beg & end are in the right order. (let ((str (concat (buffer-substring beg end) "\n"))) ;; Remove comments (with-temp-buffer (insert str) (goto-char (point-min)) ;; Delete all the comments (while (search-forward "%" nil t) (when (not (matlab-cursor-in-string)) (delete-region (1- (point)) (matlab-point-at-eol)))) (setq str (buffer-substring-no-properties (point-min) (point-max)))) ;; Strip out blank lines (while (string-match "^\\s-*\n" str) (setq str (concat (substring str 0 (match-beginning 0)) (substring str (match-end 0))))) ;; Strip out large chunks of whitespace (while (string-match "\\s-\\s-+" str) (setq str (concat (substring str 0 (match-beginning 0)) (substring str (match-end 0))))) (when noshow ;; Remove continuations (while (string-match (concat "\\s-*" (regexp-quote matlab-elipsis-string) "\\s-*\n") str) (setq str (replace-match " " t t str))) (while (string-match "\n" str) (setq str (replace-match ", " t t str))) (setq str (concat str "\n"))) str)) (defun matlab-shell-region->internal (beg end &optional noshow) "Create a command to run the region between BEG and END. Uses internal MATLAB API to execute the code keeping breakpoints and local functions active. Optional argument NOSHOW specifies if we should echo the region to the command line." ;; Reduce end by 1 char, as that is how ML treats it (setq end (1- end)) (let ((enc-str (symbol-name buffer-file-coding-system))) (when (string-match "\\script (beg end &optional noshow) "Extract region between BEG & END into a temporary M file. The tmp file name is based on the name of the current buffer. The extracted region is unmodified from src buffer unless NOSHOW is non-nil, in which case ; are added to quiesce the buffer. Scan the extracted region for any functions that are in the original buffer,and include them. Return the name of the temporary file." (interactive "r") (require 'semantic-matlab) (let* ((start (count-lines (point-min) beg)) (len (count-lines beg end)) (stem (file-name-sans-extension (file-name-nondirectory (buffer-file-name)))) (orig (current-buffer)) (newf (concat stem "_" (number-to-string start) "_" (number-to-string len))) (bss (buffer-substring-no-properties beg end)) (buff (find-file-noselect (concat newf ".m"))) (intro "%% Automatically created temporary file created to run-region") ;; These variables are for script / fcn tracking (functions (matlab-semantic-get-local-functions-for-script (current-buffer))) ) ;; TODO : if the directory in which the current buffer is in is READ ONLY ;; we should write our tmp buffer to /tmp instead. (with-current-buffer buff (goto-char (point-min)) ;; Clean up old extracted regions. (when (looking-at intro) (delete-region (point-min) (point-max))) ;; Don't stomp on old code. (when (not (= (point-min) (point-max))) (error "Region extract to tmp file: Temp file not empty!")) (insert intro "\n\n" bss "\n%%\n") ;; Some scripts call local functions from the script. Find them ;; and copy those local scripts over. (goto-char (point-min)) (dolist (F functions) (save-excursion (when (re-search-forward (semantic-tag-name F) nil t) ;; Found, copy it in. (let ((ft (matlab-semantic-tag-text F orig))) (goto-char (point-max)) (insert "% Copy of " (semantic-tag-name F) "\n\n") (insert ft) (insert "\n%%\n")))) ) ;; Save buffer, and setup ability to run this new script. (save-buffer) ;; Flush any pending MATLAB stuff. (accept-process-output) ;; This sets us up to cleanup our file after it's done running. (add-hook 'matlab-shell-prompt-appears-hook `(lambda () (matlab-shell-cleanup-extracted-region ,(buffer-file-name buff)))) (kill-buffer) ) ;; Return the command. (concat "run('" (expand-file-name newf) "')\n"))) (defun matlab-shell-cleanup-extracted-region (fname) "Cleanup the file created when we previously extracted a region. Argument FNAME specifies if we should echo the region to the command line." (condition-case nil (delete-file fname) (error nil)) (remove-hook 'matlab-shell-prompt-appears-hook ;; The below needs to be a perfect match to the setter. `(lambda () (matlab-shell-cleanup-extracted-region ,fname))) ) (defun matlab-find-file-click (e) "Find the file clicked on with event E on the current path." (interactive "e") (mouse-set-point e) (let ((f (matlab-read-word-at-point))) (if (not f) (error "To find an M file, click on a word")) (matlab-shell-locate-fcn f))) (provide 'matlab-shell) ;;; matlab-shell.el ends here ;; LocalWords: el Ludlam zappo compat comint gud Slience defcustom el cb ;; LocalWords: nodesktop defface autostart netshell emacsclient errorscanning ;; LocalWords: cco defun setq Keymaps keymap kbd featurep fboundp subprocess ;; LocalWords: online EDU postoutput progn subjob eol mlfile emacsinit msbn pc ;; LocalWords: Thx Chappaz windowid dirtrackp dbhot erroexamples Ludlam zappo ;; LocalWords: compat comint gud Slience defcustom nodesktop defface emacscd ;; LocalWords: autostart netshell emacsclient errorscanning cco defun setq el ;; LocalWords: Keymaps keymap kbd featurep fboundp subprocess online EDU ;; LocalWords: postoutput progn subjob eol mlfile emacsinit msbn pc Thx Ludlam ;; LocalWords: Chappaz windowid dirtrackp dbhot erroexamples cdr ENDPT dolist ;; LocalWords: overlaystack mref deref errortext ERRORTXT Missmatched zappo ;; LocalWords: shellerror dbhotlink realfname aset buf noselect tcp auth ef ;; LocalWords: dbhotlinks compat comint gud Slience defcustom capturetext ;; LocalWords: nodesktop defface autostart netshell emacsclient errorscanning ;; LocalWords: cco defun setq Keymaps keymap kbd featurep fboundp subprocess ;; LocalWords: online EDU postoutput progn subjob eol mlfile emacsinit msbn pc ;; LocalWords: Thx Chappaz windowid dirtrackp dbhot erroexamples cdr ENDPT ;; LocalWords: dolist overlaystack mref deref errortext ERRORTXT Missmatched ;; LocalWords: shellerror dbhotlink realfname aset buf noselect tcp auth ef ;; LocalWords: dbhotlinks dbhlcmd endprompt mello pmark memq promptend ;; LocalWords: numchars integerp emacsdocomplete mycmd ba nreverse EMACSCAP ;; LocalWords: emacsdocompletion subfield fil byteswap stringp cbuff mapcar bw ;; LocalWords: FCN's alist BUILTINFLAG dired bol bobp numberp lattr princ ;; LocalWords: minibuffer fn matlabregex stackexchange doesnt lastcmd Emacsen ;; LocalWords: notimeout stacktop eltest testme localfcn LF mlx meth fileref ;; LocalWords: funcall ec basec sk ignoredups boundp nondirectory edir sexp iq ;; LocalWords: Fixup mapc ltype noshow emacsrunregion cnt commandline elipsis ;; LocalWords: newf bss fname nt initcmd nsa ecc ecca clientcmd buffname ;; LocalWords: insertbuff bufflist evalforms