/* Part of XPCE --- The SWI-Prolog GUI toolkit Author: Jan Wielemaker and Anjo Anjewierden E-mail: jan@swi.psy.uva.nl WWW: http://www.swi.psy.uva.nl/projects/xpce/ Copyright (c) 1985-2002, University of Amsterdam All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ :- module(draw, [ draw/0 % Start drawing tool , draw/1 % Start editing file ]). draw_version(4.2). /******************************** * LINKING OTHER FILES * ********************************/ /* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - This module is the toplevel module of PceDraw. It loads the various other modules and defines class `draw', of which the drawing tool is an instance. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ /* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - PCE/Prolog modules that should run on SICStus Prolog must include the library pce, which defines the basic interface predicates. The require/1 directive loads the requested predicates from the (PCE-)library. None of these declarations are needed for SWI-Prolog as SWI-Prolog will inherit the PCE system predicates from the module `user' and load the other predicates using the autoloader. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ :- use_module(library(pce)). :- use_module(library(pce_config)). :- use_module(library(pce_report)). :- use_module(library(toolbar)). :- ensure_loaded(library(help_message)). :- require([ default/3 , file_base_name/2 , file_name_extension/3 , listen/3 , pce_help_file/2 , send_list/3 , unlisten/1 ]). /* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - With this declaration we load the other Prolog modules of PceDraw. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ :- consult([ config % Configuration declarations , gesture % Gestures , shapes % Drawable shapes , canvas % Drawing plain , menu % Icon Menu , undo % Undo Recording , exportpl % Export using drag-and-drop ]). /* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - The additional file declarations below are not always needed. For this reason they are defined using pce_autoload/2. This keeps the initial image small, reducing startup time. Whenever an attempt is made to create an instance or subclass of a class that is defined as an autoload class, PCE will activate the `undefined_class' member of `@pce <-exception_handlers'. Using the standard interface setup, this will cause Prolog to examine the autoload declarations and load the specified file. The library file find_file.pl defines class finder, an instance of which can be used to ask the user for a Unix file. One instance can be used for finding any file that is needed by PceDraw. For this reason we use the pce_global/2 construct. Whenever @finder is passed via one of the interface predicates and @finder does not exist, the database of global declarations is searched. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ :- pce_autoload(draw_attribute_editor, library('draw/attribute')). :- pce_autoload(finder, library(find_file)). :- pce_global(@finder, new(finder)). %:- pce_image_directory(library('draw/bitmaps')). /******************************** * ENTRY POINT * ********************************/ /* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Toplevel goals: # draw Create a drawing tool and display it. # draw(+File) As draw/0, but immediately loads a file. One could choose not to define these predicate and declare the class `draw' to be the toplevel or public functionality. This actually might be a cleaner solution than the one choosen here. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ draw :- new(Draw, draw), send(Draw, open, normalise := @on). draw(File) :- file_name_extension(File, pd, PdFile), new(Draw, draw), send(Draw, open), get(Draw, canvas, Canvas), ( send(file(PdFile), exists) -> send(Canvas, load, PdFile, @on) ; send(Canvas, file, PdFile) ). /******************************** * CLASS DRAW * ********************************/ resource(draw, image, image('32x32/drawing.xpm')). resource(open, image, image('16x16/open.xpm')). resource(save, image, image('16x16/save.xpm')). resource(print, image, image('16x16/print.xpm')). resource(undo, image, image('16x16/undo.xpm')). resource(cut, image, image('16x16/cut.xpm')). resource(copy, image, image('16x16/copy.xpm')). resource(paste, image, image('16x16/paste.xpm')). resource(duplicate, image, image('16x16/duplicate.xpm')). resource(distribute, image, image('16x16/distribute.xpm')). /* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Class `draw' defines and manages the entire tool. Its initialisation builds the entire tool and the resulting instance provide means of communication between the various parts. The call - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ :- pce_begin_class(draw, frame, "The PceDraw application class"). /* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - starts the definition of a new class `draw' that is a subclass of class frame. Classes should always be a subclass of some existing class. If there is no particular PCE class to inherit from, this should be class `object', the root of the PCE class hierarchy. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ variable(title, name, get, "Base-name of the program"). variable(version, real, get, "Current version"). /* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - If the initialisation of an instance of this class differs from the initialisation of its super-class, a method called `->initialise' must be defined. It's task is to initialise the new instance. When PCE creates an instance (with new/2, @pce <-instance or otherwise), it allocates memory for it, resets all slots to @nil and calls the ->initialise method. The arguments to this method may differ from the initialisation arguments of the super class. In this case, frame has three (optional) initialisation arguments, while class draw has none. Somewhere in the initialise method, there should be a call send(Self, send_super, initialise, ...) To invoke the initialisation method of the superclass. The arguments should be valid arguments for the initialisation method of this superclass. The normal schema is: 1) Check the arguments and compute defaults from them. 2) send(Self, send_super, initialise, ...) 3) Do class specific initialisation. In our case, the various windows that make up the drawing tool are created and attached to the frame. To avoid a giant clause and improve the possibilities to refine the drawing tool using subclassing, the method ->fill_dialog is called to fill the dialog rather than putting this code in ->initialise. For PCE-3 users, note the use of the term new/2 in the second and further sends to create the windows inline and get the reference. This approach is preferred over a separate new/2 and ->append. It is shorter but -more important- it attaches the canvas immediately to the frame, making the frame responsible for its destruction. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ initialise(Draw, Title:[name]) :-> fix_fonts, ensure_loaded_config(draw_config:_ConfigFile), default(Title, 'PceDraw', TheTitle), send(Draw, send_super, initialise, TheTitle), send(Draw, icon, resource(draw)), send(Draw, slot, title, TheTitle), draw_version(Version), send(Draw, slot, version, Version), send(Draw, done_message, message(Draw, quit)), send(Draw, append, new(Canvas, draw_canvas)), send(new(Menu, draw_menu), left, Canvas), send(new(D, dialog), above, Menu), send(new(report_dialog), below, Menu), send(Draw, fill_dialog, D), send(D, append, new(TB, tool_bar(Canvas))), send(Draw, fill_toolbar, TB), send(Draw, fill_menu), send(Menu, activate_select), ( get_config(draw_config:history/geometry/main_window, Geometry) -> send(Draw, geometry, Geometry) ; true ), listen(Draw, set_config(draw_config:resources/default_font, Font), send(Draw, default_font, Font)). unlink(Draw) :-> unlisten(Draw), get(Draw, geometry, Geometry), send(Draw, send_super, unlink), set_config(draw_config:history/geometry/main_window, Geometry). % The Windows win_ansi font reproduces poorly in exported metafiles, hence % we force the usage of a normal font. fix_fonts :- send(@display, open), get(@pce, convert, normal, font, Font), get(Font, family, win_ansi), !, send(@display, font_alias, normal, font(helvetica, roman, 12), @on). fix_fonts. resize(Draw) :-> send(Draw, send_super, resize), get(Draw, menu, MenuWindow), send(MenuWindow, adjust). /******************************** * COMMAND AREA (DIALOG) * ********************************/ /* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Unlike the icon menu and the canvas, the dialog is just an instance of the PCE class `dialog'. This approach is taken because the menus in the dialog can easily find the references to the various parts of PceDraw they want to activate. It is cumbersome and unnecessary to send the messages first to the dialog and from there to the appropriate part of the system. In a sense, it would be cleaner to send the message to the overall drawing tool first and from there to the appropriate part. This would provide all the functionality of the tool menus with the tool as a whole. As a drawback, it implies the code to actually get something done will be spread over three places instead of two: * The menu * class draw * The part that takes care of the actual function. First of all, a number of obtainers and messages that can be reused in the remainder of the menu are created. This approach has two advantages over doing it `in-place': * By giving it a name, it becomes clear which part of the system is referred to or what function the message realises * It exploits the reusability of messages and obtainers: only one such object is used for all the menus. Next, the various dialog_items are attached to the dialog. Note again the use of the new/2 construct in send to get the references. By using `Dialog ->append' the dialog_items are placed in a two-dimensional grid. They are given a position when the dialog is created using the `Dialog ->layout' method. Finally, the (popup) menus of the menu_bar are filled. The initialisation arguments of class menu_item are: # Value Used to refer to the item. When the <->message of the menu_item is @default and there is a message attached to the menu, this value is forwarded via the message as @arg1. # Message This message is sent when the item is selected. # Label This is a name or image. When @default, a default label will be computed from the value. See `menu_item <-default_label'. # Condition This message will be evaluated just before the menu is shown. When it succeeds the item will be active, otherwise it will be inactive (greyed). The evaluation of all condition messages in a menu should be fast for good interactive response. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ fill_dialog(Draw, D:dialog) :-> "Fill the top-dialog window":: send(D, border, size(0, 2)), send(D, gap, size(10, 3)), send(D, pen, 0), new(Canvas, Draw?canvas), new(Menu, Draw?menu), new(Selection, Canvas?selection), new(NonEmptySelection, not(message(Selection, empty))), new(OneSelected, Selection?size == 1), new(SelectionIsConnection, and(OneSelected, message(Selection?head, instance_of, connection))), new(NonEmptyDrawing, not(message(Canvas?graphicals, empty))), new(HasCurrentFile, Canvas?file \== @nil), new(HasMetaFile, ?(@pce, convert, win_metafile, class)), send(D, append, new(MB, menu_bar(actions))), send(MB, append, new(F, popup(file))), send(MB, append, new(E, popup(edit))), send(MB, append, new(P, popup(proto))), send(MB, append, new(S, popup(settings))), send(MB, append, new(H, popup(help))), new(UM, message(@arg1?frame, select_mode)), send_list([F, E, S], update_message, UM), send_list(F, append, [ menu_item(load, message(Canvas, load_from)) , menu_item(import, message(Canvas, import), @default, @on, NonEmptyDrawing) , menu_item('save (Control+S)', message(Canvas, save), @default, @off, and(NonEmptyDrawing, Canvas?modified == @on, HasCurrentFile)) , menu_item(save_as, message(Canvas, save_as), @default, @on, NonEmptyDrawing) , menu_item(postscript, message(Canvas, postscript), @default, @off, HasCurrentFile) , menu_item(postscript_as, message(Canvas, postscript_as), @default, @off, NonEmptyDrawing) , new(SaveAsMetaFile, popup(save_as_metafile)) , menu_item('print (Control+P)', message(Canvas, print), @default, @on, NonEmptyDrawing) , menu_item(new_window, message(Draw, new_window), end_group := @on) , new(RF, menu_item(recent_file, end_group := @on)) , menu_item(quit, message(Draw, quit), @default, @off) ]), send(RF, popup, new(RFP, popup(RF?value, message(Draw, load_recent_file, @arg1)))), send(RFP, update_message, message(Draw, fill_recent_files, RFP)), send_list(P, append, [ new(CreateProto, popup(create)) , menu_item(delete, message(Menu, delete), @default, @on, message(Menu, can_delete)) , menu_item(load, message(Menu, load_from), @default, @off) , menu_item(save, message(Menu, save), @default, @off, Menu?modified == @on) , menu_item(save_as, message(Menu, save_as), @default, @on, Menu?modified == @on) ]), send_list(CreateProto, append, [ menu_item(as_is, message(Menu, create_proto, Selection, as_is), @default, @off, and(NonEmptySelection, not(SelectionIsConnection))), menu_item(virgin, message(Menu, create_proto, Selection, virgin), @default, @off, OneSelected) ]), new(UndoBuffer, Canvas?undo_buffer), send_list(E, append, [ menu_item('Undo (Control+Z)', message(UndoBuffer, open, Draw), condition := message(UndoBuffer, can_undo)) , menu_item('Send to foreground (Control+E)', message(Canvas, expose_selection), @default, @off, NonEmptySelection) , menu_item('Send to background (Control+H)', message(Canvas, hide_selection), @default, @on, NonEmptySelection) , menu_item(align, message(Canvas, align_selection), @default, @on, Selection?size > 1) , menu_item(edit_attributes, message(Canvas, edit_selection), @default, @on, NonEmptySelection) , menu_item('Select all (Control+A)', message(Canvas, select_all), condition := NonEmptyDrawing) , menu_item(duplicate, message(Canvas, duplicate_selection), @default, @off, NonEmptySelection) , menu_item('Cut (DEL)', message(Canvas, cut_selection), @default, @off, NonEmptySelection) , menu_item('Copy (Control+C)', message(Canvas, copy_selection), @default, @off, NonEmptySelection) , menu_item('Paste (Control+V)', message(Canvas, paste), @default, @on, message(@prolog, exists_clipboard)) , new(ClipBoard, popup(clipboard)) , menu_item(import_image, message(Canvas, import_image), @default, @on) , menu_item(import_frame, message(Canvas, import_frame), @default, @on) , menu_item(clear, and(message(Draw, select_mode), message(Canvas, clear, @on)), @default, @off, NonEmptyDrawing) ]), send(ClipBoard, end_group, @on), send(ClipBoard?context, condition, HasMetaFile), send_list(ClipBoard, append, [ menu_item(clip_drawing, message(Canvas, export_win_metafile, drawing), condition := NonEmptyDrawing), menu_item(clip_selection, message(Canvas, export_win_metafile, selection), condition := NonEmptySelection, end_group := @on), menu_item(paste, message(Canvas, import_win_metafile)) ]), send(SaveAsMetaFile, end_group, @on), send(SaveAsMetaFile?context, condition, and(NonEmptyDrawing, HasMetaFile)), send_list(SaveAsMetaFile, append, [ menu_item(current_file, message(Canvas, save_default_windows_metafile), condition := HasCurrentFile), menu_item(ask_file, message(Canvas, windows_metafile)) ]), send(S, multiple_selection, @on), send(S, show_current, @on), send_list(S, append, [ menu_item(auto_align, message(Canvas, auto_align_mode, @arg1), end_group := @on), menu_item(preferences, and(message(Draw, preferences), message(S, selected, preferences, @off)), 'Preferences ...') ]), send_list(H, append, [ menu_item(about, message(Draw, about)) , menu_item(help, message(Draw, help), @default, @on) ]), ( get_config(draw_config:edit/auto_align, @on) -> send(S, selected, auto_align, @on), send(Canvas, auto_align_mode, @on) ; true ), send(D, append, new(DDD, draw_drag_drawing), right), send(DDD, reference, point(0, 10)), send(DDD, alignment, right), send(D, resize_message, message(D, layout, @arg2)). exists_clipboard :- object(@draw_clipboard). /******************************* * TOOLBAR * *******************************/ fill_toolbar(_D, TB:tool_bar) :-> "Fill the toolbar":: send_list(TB, append, [ tool_button(load_from, resource(open), open), tool_button(save, resource(save), save), tool_button(print, resource(print), print), gap, tool_button(cut_selection, resource(cut), cut), tool_button(copy_selection, resource(copy), copy), tool_button(duplicate_selection, resource(duplicate), duplicate), gap, tool_button(distribute_selection, resource(distribute), distribute), gap, tool_button(undo, resource(undo), undo) ]). /******************************** * INITIAL PROTOTYPES * ********************************/ /* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Fill the menu of the drawing tool with the standard options. After initialising the menu, its <->modified status is set to @off to indicate saving is not necessary. See the file `menu.pl' for details. Class draw_menu defines `draw_menu ->proto'. The first argument is the prototype, the second the associated mode and the third the cursor that should be displayed in this mode. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ fill_menu(Draw) :-> "Fill <-menu with standard prototypes":: get(Draw, menu, M), send(M, proto, @nil, select, top_left_arrow, tag:='Select mode'), send(M, proto, draw_text(''), draw_text, xterm, tag:='Add text'), send(M, proto, draw_box(0,0), draw_resize, crosshair, tag:='Add box'), send(M, proto, draw_ellipse(0,0), draw_resize, crosshair, tag:='Add ellipse'), send(M, proto, draw_line(0,0,0,0), draw_line, crosshair, tag:='Add line'), send(M, proto, new(draw_path), draw_path, cross, tag:='Add multi-part/smooth line'), send(M, proto, draw_bezier(point(0,0), point(0,0), point(0,0)), draw_bezier, crosshair, tag:='Add Bezier curve'), send(M, proto, link(link), draw_connect, plus, tag:='Link two objects'), send(M, proto, link(unique), draw_cconnect, plus, tag:='Link at choosen position'), send(M, modified, @off). default_font(Draw, Font:font) :-> "Change the default font":: ( get(Draw, menu, Menu), get(Menu, find_icon, message(@arg1?proto, instance_of, text), Icon) -> get(Icon, proto, Text), send(Text, font, Font), send(Icon, paint_proto) ; true ). /******************************** * FINDING PARTS * ********************************/ /* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - The methods below provide access to the various parts of the drawing tool. It makes it easier to remember how to access the parts and allows for changing the classnames without affecting too much code. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */ dialog(Draw, D) :<- "Find the dialog of the tool":: get(Draw, member, dialog, D). canvas(Draw, C:draw_canvas) :<- "Find the drawing canvas":: get(Draw, member, draw_canvas, C). menu(Draw, C:draw_menu) :<- "Find the icon menu window":: get(Draw, member, draw_menu, C). /******************************** * MODES * ********************************/ /* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - PceDraw can operate in various modes. A mode defines what happens on a left-button-down event (ms_left_down). The various recognisers for left-button events are only sensative when the draw_canvas is in the appropriate modes. ->mode and ->proto pass messages from the menu to the appropriate part of PceDraw (the canvas). As discussed above, it as ok for the dialog to send messages directly to the parts. Why is it not ok to do this from the menu? The answer is that the menu is defined in a different module of the system. It could be reusable in a different context (for example in a prototype editor), where the overall tool wants to implement mode switches differently. Note that through <-frame the